IBM HS20 Hardware Maintenance Manual - Page 36
Update POST/BIOS, Attention, Remove the flash diskette from the diskette drive.
![]() |
UPC - 087944983033
View all IBM HS20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
1 2 3 45 6 7 8 OFF 321 BIOS code page jumper (J12) Figure 6. System board: BIOS code page jumper 5. Move J12 to pins 2 and 3 to enable BIOS recovery mode. 6. Replace the cover and reinstall the blade server in the BladeCenter unit, making sure the media tray is selected by the relevant blade server. 7. Insert the BIOS flash diskette into the diskette drive. 8. Restart the blade server. The system begins the power-on self-test (POST). 9. Select 1 - Update POST/BIOS from the menu that contains various flash (update) options. 10. When you are prompted whether you want to move the current POST/BIOS image to the backup ROM location, press N. Attention: If you press Y, the damaged BIOS will be copied into the secondary page. 11. When you are prompted whether you want to save the current code to a diskette, press N. 12. Select your language (0 through 5) and press Enter to accept your choice. 13. Attention: Do not restart the blade server at this time. Remove the flash diskette from the diskette drive. 14. Turn off the blade server, remove it from the BladeCenter, and remove the cover of the blade server. 15. Move J12 to pins 1 and 2 to return to normal startup mode. 16. Replace the cover and reinstall the blade server in the BladeCenter unit; then restart the blade server. The system starts up. Statement 21 CAUTION: Hazardous energy is present when the blade server is connected to the power source. Always replace the blade cover before installing the blade server. 26 BladeCenter HS20 Type 8832: Hardware Maintenance Manual and Troubleshooting Guide
![](/manual_guide/products/ibm-hs20-hardware-maintenance-manual-d3c47e3/36.png)