IBM HS20 Hardware Maintenance Manual - Page 82
Run the Configuration/Setup Utility program.
UPC - 087944983033
View all IBM HS20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Note: See "System" on page 94 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 184 (Power-on password damaged) 1. Run the Configuration/Setup Utility program. 2. System board. 185 (Drive startup sequence information corrupted) 1. Run the Configuration/Setup Utility program. 2. System board. 189 (An attempt was made to access the server with invalid passwords) v Run the Configuration/Setup Utility program, and enter the administrator password. 201 1. (Memory test error.) If the server does not have the latest level of BIOS installed, 2. update the BIOS to the latest level and run the diagnostic program again. DIMM System board 229 (Cache error) 1. Microprocessor 2. Optional microprocessor (if installed) 262 (DRAM parity configuration error) 1. Run the Configuration/Setup Utility program. 2. Battery. 3. System board. 289 (DIMM disabled by POST or user) 1. Run the Configuration/Setup Utility program, if the DIMM was disabled by the user. 2. Disabled DIMM, if not disabled by user. 3. System board 301 (Keyboard or keyboard controller error) 1. Keyboard 2. System board 303 (Keyboard controller error) v System board 602 (Invalid diskette boot record) 1. Diskette 2. Diskette drive 3. Cable 4. System board 604 (Diskette drive error) 1. Run the Configuration/Setup Utility program and diagnostics. 2. Diskette drive. 3. Drive cable. 4. System board. 605 (Unlock failure) 1. Diskette drive 2. Drive cable 3. System board 662 (Diskette drive configuration error) 1. Run the Configuration/Setup Utility program and diagnostics. 2. Diskette drive. 3. Drive cable. 4. System board. 72 BladeCenter HS20 Type 8832: Hardware Maintenance Manual and Troubleshooting Guide