IBM HS40 Hardware Maintenance Manual - Page 15
BladeCenter, specifications, NEBS/ETSI, environments
UPC - 000435160188
View all IBM HS40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
BladeCenter HS40 specifications for NEBS/ETSI environments The following table provides a summary of the features and specifications of the BladeCenter T HS40 Type 8839 blade server operating in a NEBS/ETSI environment. Note: Power, cooling, removable-media drives, external ports, and advanced system management are provided by the IBM BladeCenter T Type Eserver 8720. Microprocessor: Supports up to 4 microprocessors v Intel Xeon 2.0 GHz or faster v L2 and L3 caches, size dependant on microprocessor Memory: v Eight double data rate (DDR) PC2100 184-pin DIMM sockets v Minimum: 512 MB v Maximum: 16 GB1 v Type: 2-way interleaved, DDR, PC2100, ECC SDRAM registered x4 (Chipkill) dual inline memory modules (DIMMs) only v Supports 256 MB, 512 MB, 1 GB, and 2 GB DIMMs v Hot Spare memory Expansion: Two I/O expansion card connectors Drives: Support for up to two Ultra320 SCSI hot-swap hard disk drives available in an optional SCSI storage expansion unit Size: v Height: 24.5 cm (9.7 inches) v Depth: 44.6 cm (17.6 inches) v Width: 5.9 cm (2.32 inches) v Maximum weight: 7.0 kg (15.4 lb) Integrated functions: v Four Gigabit Ethernet controllers v ATI Radeon 7000 video controller v Light path diagnostics v Local service processor v IDE hard disk drive controller (the IDE controller is reserved for future use and is not available for this server type) v RS-485 interface for communication with management module v Integrated Baseboard Management Controller v Universal Serial Bus (USB) v1.1 for communication with keyboard, mouse, diskette drive, and CD-ROM drive2 v Serial over LAN (SOL) management interface Electrical input: Input power: 400 W, maximum Predictive Failure Analysis (PFA) alerts: v Microprocessor v Memory v Hard disk drives Environment (NEBS): v Air temperature: - Blade server on: 5° to 40°C (41° to 104°F). Altitude: -60 to 1800 m (-197 to 6000 ft) - Blade server on (short term): -5° to 55°C (23° to 131°F) Altitude: -60 to 1800 m (-197 to 6000 ft) - Blade server on: 5° to 30°C (41° to 86°F). Altitude: 1800 to 4000 m (6000 to 13 000 ft) - Blade server on (short term): -5° to 45°C (23° to 113°F). Altitude: 1800 to 4000 m (6000 to 13 000 ft) - Blade server off: -40° to 70°C (-40° to 158°F) v Humidity: - Blade server on: 5% to 80% - Blade server on (short term): 5% to 90% but not to exceed 0.024 kg water/kg of dry air - Blade server off: uncontrolled Note: ″Short term″ refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year. (This refers to a total of 360 hours in any given year, but no more than 15 occurrences during that 1-year period.) Notes: 1. You might have to enable large-memory support for your operating system to access all of the memory that is installed in your blade server. See the documentation for your operating system for information. 2. The operating system in the blade server must provide USB support for the blade server to recognize and use the keyboard, mouse, CD-ROM drive, and an external diskette drive. The BladeCenter T unit uses USB for internal communications with these devices. Chapter 1. Introduction 5