IBM HS40 Hardware Maintenance Manual - Page 94
FRU/action
UPC - 000435160188
View all IBM HS40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Note: See Chapter 7, "Parts listing, Type 8839," on page 105 to determine which components should be replaced by a field service technician. Error code/symptom FRU/action 165-198-000 (Service Processor: Aborted) 1. Rerun the diagnostic test 2. Fix other error conditions that may be keeping ASM busy. Refer to the error log and diagnostic panel. 3. Power down the blade server, and reseat it in the chassis. 4. System board. 165-201-000 (Service Processor: Failed) 1. Power down blade server and reseat it in chassis. 2. System board. 165-330-000 (Service Processor: Failed) Update to the latest ROM diagnostic level and retry 165-342-000 (Service Processor: Failed) 1. Ensure latest firmware levels for ASM and BIOS are installed. 2. Power down the blade server, and reseat it in the chassis. 3. System board. 166-198-000 System Management: Aborted (Unable to communicate with ASM. It may be busy. Run the test again.) 1. Run the diagnostic test again. 2. Correct other error conditions and retry. These include other failed system management tests and items logged in the System Error Log of the management module. 3. Power down the blade server, and reseat it in the chassis. 4. System board. 166-201-001 System Management: Failed 1. DIMMs (I2C bus error(s) See SERVPROC and DIAGS entries in event log.) 2. System board 166-201-002 System Management: Failed 1. Reseat I2C cable between the operator information card and (I2C bus error(s) See SERVPROC and the system board. DIAGS entries in event log.) 2. Operator information card. 3. System board. 166-201-003 System Management: Failed 1. I/O adapter (I2C bus error(s) See SERVPROC and DIAGS entries in event log.) 2. System board 166-201-004 System Management: Failed 1. SCSI storage expansion unit (I2C bus error(s) See SERVPROC and DIAGS entries in event log.) 2. System board 166-201-005 System Management: Failed 1. DIMMs (I2C bus error(s) See SERVPROC and DIAGS entries in event log.) 2. Microprocessors 3. System board 166-342-000 System Management: Failed 1. Ensure the latest firmware levels for Remote Supervisor (ASM adapter BIST indicate failed tests.) Adapter and BIOS are installed. 2. Power down the blade server, and reseat it in the chassis. 3. Remote Supervisor Adapter. 166-400-000 System Management: Failed 1. Reflash or update firmware for ISMP. (ISMP self test result failed tests: x where x = Flash, RAM, or ROM.) 2. System board. 167-300-XXX ISMP: Failed (ISMP indicates failure in self test.) 1. Remove and reinstall the blade server in the BladeCenter unit. 2. Reflash or update firmware for ISMP. 3. I/O board. 84 BladeCenter HS40 Type 8839: Hardware Maintenance Manual and Troubleshooting Guide