IBM HS40 User Guide - Page 38
Opening, blade, server, cover, Removing, bezel, assembly
UPC - 000435160188
View all IBM HS40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Opening the blade server cover The following illustration shows how to open the cover on the blade server. Cover pins Blade cover Blade-cover release Air baffle Blade-cover release Complete the following steps to open the blade server cover: 1. Read the safety information beginning on page vii and "Installation guidelines" on page 21. 2. Carefully lay the blade server down on a flat, static-protective surface, with the cover side up. 3. Press the blade-cover release on each side of the blade server and lift the cover open, as shown in the illustration. 4. Lay the cover flat, or lift it from the blade server. Statement 21: CAUTION: Hazardous energy is present when the blade server is connected to the power source. Always replace the blade cover before installing the blade server. Removing the blade server bezel assembly To install certain options, you must first remove the blade server bezel assembly. Complete the following steps to remove the blade server bezel assembly: 1. Read the safety information beginning on page vii and "Installation guidelines" on page 21. 2. Open the blade server cover (see "Opening the blade server cover" for instructions) and lift it off the blade server. 24 BladeCenter HS40 Type 8839: Installation and User's Guide