IBM HS40 User Guide - Page 60
Closing, blade, server, cover
UPC - 000435160188
View all IBM HS40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
3. Insert the tabs on the bottom of the bezel up into the matching holes on the server chassis; then, rotate the top of the bezel toward the server until the tabs at the top of the bezel snap into place. Closing the blade server cover Important: The blade server cannot be inserted into the BladeCenter unit until the cover is installed and closed or an expansion unit is installed. Do not attempt to override this protection. The following illustration shows how to close the blade server cover. Cover pins Blade cover Air baffle Complete the following steps to close the blade server cover: 1. Read the safety information beginning on page vii and "Installation guidelines" on page 21. 2. If you removed the blade bezel assembly, replace it now. See "Installing the blade server bezel assembly" on page 45 for instructions. 3. Before closing the cover, check that all components are installed and seated correctly and that you have not left loose tools or parts inside the blade server. 46 BladeCenter HS40 Type 8839: Installation and User's Guide