Insignia NS-L46Q120-10A User Manual (English) - Page 13

NS-L42Q120-10A/NS-L46Q120-10A 42"/46" LCD TV Aiming the remote control Point the remote control towards the remote sensor on the front of your TV. The remote control should be used within 26 feet (7.9 m) of your TV when you point the remote control directly at the remote sensor and not from an angle. If you use the remote control at an angle to the remote sensor, the effective distance may be less. Using the remote control holder Your TV comes with a remote control holder you can put the remote control in when you are not using it. You can put the holder on a table or mount it on a wall. Screw Screw Tips Different types of walls may require different types of screws. If you want to wall mount the remote control holder, make sure that you use the correct screws for the type of wall. (Screws are not provided.) Programming your remote control To program your remote to control home theater devices, follow these steps. To program your remote control: 1 Before proceeding, find the codes for the devices you want to program in "Manufacturers' codes" on page 38 and write them down or highlight them. 2 Turn on the device (for example, a DVD player) and, if needed, load media such as a DVD. 3 Press the device key on the remote for the device that you want to program (TV, DVD, STB, or AUX). 4 Press and hold SET until the red LED blinks twice, then release. 5 Enter the first five-digit code for the device and brand that you want to program. The LED blinks once as each digit is entered. If the code is valid, the LED blinks twice. Note If the LED does not blink twice, repeat steps 2 to 4 and try entering the code again. 6 Aim the remote at the device and press (power). The device should turn off. If it does not, repeat Steps 3 through 5, trying each code for your brand until you find one that works. If you cannot find a code that works, see "Searching for your code" below. 7 Repeat Steps 1 to 5 for the other devices you want to control. For future reference, write down each working device code. Searching for your code If your device does not respond to the remote control after trying all codes listed for your brand, or if your brand is not listed, try searching for your code. To search for your code: 1 Turn on the device you want to control. 2 Press the desired device key (TV, DVD, STB, or AUX) once. 3 Press and hold SET until the red LED blinks twice, then release. 4 Enter 9 9 1. The LED blinks twice. 5 Press the device group number for your device type (see table below). • 0-Cable (cable converters, video accessories, satellite receivers) • 1-TV (TVs) • 2-VCR (VCRs, DVD players) • 3-Audio (audio amplifiers, audio amps/tuners, CD players) 6 Aim the remote at the device and press (power). The remote sends IR codes from its library to the selected device, starting with the most popular code first. If the device responds, go to Step 8. www.insigniaproducts.com 9