Insignia NS-L46Q120-10A User Manual (English) - Page 18

NS-L42Q120-10A/NS-L46Q120-10A 42"/46" LCD TV Connecting cable TV Your TV has a coaxial jack for connecting cable TV. Some cable TV providers scramble the signals for "premium" (pay) channels. To view these channels, you need a converter/descrambler box. If you do not require a converter/descrambler box, you can connect your cable TV directly to your TV. For more information, see "No converter/descrambler box" on page 14. If you require a converter/descrambler box, you can connect your cable TV using an RF switch (not included). For more information about connecting a converter/descrambler box, see "With converter/descrambler box" on page 14 and contact your cable TV provider. You can also connect cable TV using an HDMI, component video, S-Video, or AV connection, depending on your cable box. No converter/descrambler box To connect cable TV without a converter/descrambler box: 1 Connect one end of a coaxial cable to the ANT./CABLE IN jack on the back of your TV. 2 Connect the other end of the cable to the cable TV wall outlet. With converter/descrambler box If your cable box descrambles only some channels (such as premium channels), you need a two-way splitter, an RF (A/B) switch, and four lengths of antenna cable. The two-way splitter and RF switch are not provided. To connect cable TV with a converter/descrambler box: • Use the following illustration as a guide to connect a converter/descrambler box. Set the RF switch to the A position to tune to unscrambled channels using your TV remote control. Set the RF switch to the B position to watch scrambled channels using the converter/descrambler controls. RF switch A Two-set signal splitter B Out In TV Cable converter/descrambler box Connecting a VCR To connect a VCR: 1 Make sure the TV's power cord is unplugged and the VCR is turned off. 2 Connect an AV cable to the VIDEO IN 2 VIDEO and VIDEO IN 2 L and R audio jacks on the back of your TV. Note The connectors on AV cables are often color-coded. Yellow is video, white is left audio, and red is right audio. VCR Back of TV 3 Connect the other end of the cable to the VIDEO OUT and AUDIO OUT jacks on the VCR. 4 Turn on your TV, then turn on the VCR. 5 Press INPUT to open the source list, press or to highlight A/V 2, then press ENTER. Note You can also press VIDEO twice to select A/V 2. 6 Insert a videotape into the VCR, then press PLAY. 14 www.insigniaproducts.com