Insignia NS-L46Q120-10A User Manual (English) - Page 8
Introduction, Installing the stand, Installing a wall-mount bracket - wall mount
View all Insignia NS-L46Q120-10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
NS-L42Q120-10A/NS-L46Q120-10A 42"/46" LCD TV 42"/46" LCD TV Introduction Congratulations on your purchase of a high-quality Insignia product. Your NS-L42Q120-10A or NS-L46Q120-10A represents the state of the art in LCD TV design and is designed for reliable and trouble-free performance. Installing the stand To install the stand: 1 Place a cushion or cloth on a flat surface, such as a table, then place the TV face down on the cushion or cloth. 2 Insert the stand into the TV base, then secure the stand to the base with the four provided M4 × L10 mm screws. 2 Remove the four screws that secure the stand to the base, then remove the base. 3 Attach the included TV base cover to the TV base to prevent debris from entering your TV after it is mounted on the wall. Note To remove the base, reverse Step 2. Installing a wall-mount bracket To install a wall-mount bracket: Warning These servicing instructions are for use by qualified service personnel only. To reduce the risk of hazards, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. 1 Place a cushion or cloth on a flat surface, such as a table, then place the TV face down on the cushion or cloth with the stand extended over the edge of the table. Cover 4 Attach the wall-mount bracket with the four screws that come with the wall-mount bracket kit. 4 www.insigniaproducts.com