Insignia NS-R5101 User Manual (English) - Page 29

Insignia NS-R5101 5.1 Surround Sound A/V Receiver Dubbing from video components onto VIDEO1 (VCR or DVDR) To dub from video components onto VIDEO1: 1 Select the video source (VIDEO2 or VIDEO3). Using the sleep timer The sleep timer automatically turns the receiver off after a specified period of time. To use the sleep timer: • Press the SLEEP button to specify the amount of time you want the receiver to play. OR 2 Start recording on the video recorder. 3 Start play on your input device. Note The audio and video signals from the input are dubbed onto the VIDEO1 recorder. You can view them at the same time on the television and hear them from the speakers. Dubbing from audio and video signals separately onto VIDEO1 Use this procedure if you are dubbing the video from VIDEO2 and mixing it with the audio from the CD audio onto VIDEO1. To dub from video components onto VIDEO1: 1 Select VIDEO2 as the video recording source. Each time this button is pressed, the time changes as follows: • 10 minutes • 20 minutes • 30 minutes 90 minutes • OFF Note While operating the sleep timer, the lights up. Adjusting the display brightness To adjust the display brightness: • Press the DIMMER button to specify the brightness of the display. OR 2 Select CD as the audio recording source. OR 3 Start recording on the video recorder. 4 Start play on the video source and on the CD source. Notes • The audio and video signals from the inputs are dubbed onto the VIDEO1 recorder. You can view them at the same time on the television and hear them from the speakers. • Make sure that you follow the order of steps 1 and 2. Each time this button is pressed, the brightness changes as follows: • ON • dimmer • OFF Note If the display is off, pressing any button turns the display on. www.insignia-products.com 29