Insignia NS-R5101 User Manual (English) - Page 3

Insignia NS-R5101 5.1 Surround Sound A/V Receiver Contents Introduction 3 Safety information 3 Identifying features 5 Front controls 5 Fluorescent display 6 Back 6 Setting up your receiver 7 Unpacking your receiver 7 Locating your receiver 7 Locating your speakers 7 Connecting your speakers 8 Connecting the antennas 9 Connecting devices 9 Connecting headphones 17 Connecting the power 17 Modifying the settings 17 Navigating through the setup menu 17 Modifying the tone control 18 Modifying the input settings 18 Modifying the speaker settings 19 Using the remote control 22 Using the buttons 22 Installing batteries 23 Using the remote control 23 Using your receiver 24 Using your receiver 24 Using surround sound 26 Listening to radio broadcasts 27 Recording 28 Using the sleep timer 29 Adjusting the display brightness 29 Displaying the receiver status 30 Maintaining 30 Troubleshooting 30 Specifications 31 1 Year Limited Warranty 33 Français 35 Español 71 Introduction Congratulations on your purchase of a high-quality Insignia product. Your NS-R5101 represents the state of the art in digital home theater receiver design and is designed for reliable and trouble-free performance. Safety information Electric shock warning CAUTION Risk of Electric Shock Do Not Open Warning To reduce the risk of electric shock, do not remove the cover or back. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within your receiver's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying your receiver. Warning To prevent fire or electric shock hazard, do not expose this receiver to rain or moisture. Caution Your receiver should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on it. Ventilation Caution Do not block any ventilation openings. Install in accordance with these instructions. Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of your receiver, and to protect it from over-heating. The openings should never be blocked by placing your receiver on a bed, sofa, rug, or other similar surface. This receiver should not be placed in a built-in installation, such as a bookcase or rack, unless correct ventilation is provided or these instructions have been followed. Power cord Caution We recommend that most appliances be placed upon a dedicated circuit-a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this manual for power requirements. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine your receiver cord, and if its appearance indicates damage or deterioration, unplug it, discontinue use of your receiver, and have the cord replaced with an exact replacement part by an authorized service provider. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits your receiver. To disconnect power from the outlet, pull out the plug. When installing your receiver, make sure that the plug is easily accessible. www.insignia-products.com 3