Home » Intel Manuals » Processors » Intel BX80571E5300 » Manual Viewer

Intel BX80571E5300 Data Sheet - Page 68

Table 24., Signal Description, Sheet 5 of 10

UPC - 735858204996

Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

Land Listing and Signal Descriptions Table 24. Signal Description (Sheet 5 of 10) Name Type Description FERR#/PBE# GTLREF[1:0] HIT# HITM# IERR# IGNNE# INIT# Output FERR#/PBE# (floating point error/pending break event) is a multiplexed signal and its meaning is qualified by STPCLK#. When STPCLK# is not asserted, FERR#/PBE# indicates a floating-point error and will be asserted when the processor detects an unmasked floating-point error. When STPCLK# is not asserted, FERR#/PBE# is similar to the ERROR# signal on the Intel 387 coprocessor, and is included for compatibility with systems using MS-DOS*-type floating-point error reporting. When STPCLK# is asserted, an assertion of FERR#/PBE# indicates that the processor has a pending break event waiting for service. The assertion of FERR#/ PBE# indicates that the processor should be returned to the Normal state. For additional information on the pending break event functionality, including the identification of support of the feature and enable/disable information, refer to volume 3 of the Intel Architecture Software Developer's Manual and the Intel Processor Identification and the CPUID Instruction application note. Input GTLREF[1:0] determine the signal reference level for GTL+ input signals. GTLREF is used by the GTL+ receivers to determine if a signal is a logical 0 or logical 1. Input/ Output Input/ Output HIT# (Snoop Hit) and HITM# (Hit Modified) convey transaction snoop operation results. Any FSB agent may assert both HIT# and HITM# together to indicate that it requires a snoop stall, which can be continued by reasserting HIT# and HITM# together. Output IERR# (Internal Error) is asserted by a processor as the result of an internal error. Assertion of IERR# is usually accompanied by a SHUTDOWN transaction on the processor FSB. This transaction may optionally be converted to an external error signal (e.g., NMI) by system core logic. The processor will keep IERR# asserted until the assertion of RESET#. This signal does not have on-die termination. Refer to Section 2.6.2 for termination requirements. Input IGNNE# (Ignore Numeric Error) is asserted to the processor to ignore a numeric error and continue to execute noncontrol floatingpoint instructions. If IGNNE# is de-asserted, the processor generates an exception on a noncontrol floating-point instruction if a previous floating-point instruction caused an error. IGNNE# has no effect when the NE bit in control register 0 (CR0) is set. IGNNE# is an asynchronous signal. However, to ensure recognition of this signal following an Input/Output write instruction, it must be valid along with the TRDY# assertion of the corresponding Input/ Output Write bus transaction. Input INIT# (Initialization), when asserted, resets integer registers inside the processor without affecting its internal caches or floating-point registers. The processor then begins execution at the power-on Reset vector configured during power-on configuration. The processor continues to handle snoop requests during INIT# assertion. INIT# is an asynchronous signal and must connect the appropriate pins/lands of all processor FSB agents. If INIT# is sampled active on the active to inactive transition of RESET#, then the processor executes its Built-in Self-Test (BIST). 68 Datasheet

Section	Page
Intel® Pentium® Dual-Core Processor E5000D Series	1
Contents	3
Figures	5
Tables	6
Intel® Pentium® Dual-Core Processor E5000 Series Features	7
Revision History	8
1 Introduction	9
1.1 Terminology	9
1.1.1 Processor Terminology Definitions	10
1.2 References	11
Table 1. References	11
2 Electrical Specifications	13
2.1 Power and Ground Lands	13
2.2 Decoupling Guidelines	13
2.2.1 VCC Decoupling	13
2.2.2 VTT Decoupling	13
2.2.3 FSB Decoupling	14
2.3 Voltage Identification	14
Table 2. Voltage Identification Definition	15
2.4 Reserved, Unused, and TESTHI Signals	16
2.5 Power Segment Identifier (PSID)	16
2.6 Voltage and Current Specification	17
2.6.1 Absolute Maximum and Minimum Ratings	17
Table 3. Absolute Maximum and Minimum Ratings	17
2.6.2 DC Voltage and Current Specification	18
Table 4. Voltage and Current Specifications	18
Table 5. Processor VCC Static and Transient Tolerance	19
Figure 1. Processor VCC Static and Transient Tolerance	20
2.6.3 VCC Overshoot	20
Table 6. VCC Overshoot Specifications	20
Figure 2. VCC Overshoot Example Waveform	21
2.6.4 Die Voltage Validation	21
2.7 Signaling Specifications	21
2.7.1 FSB Signal Groups	22
Table 7. FSB Signal Groups	22
Table 8. Signal Characteristics	23
Table 9. Signal Reference Voltages	23
2.7.2 CMOS and Open Drain Signals	23
2.7.3 Processor DC Specifications	24
Table 10. GTL+ Signal Group DC Specifications	24
Table 11. Open Drain and TAP Output Signal Group DC Specifications	24
Table 12. CMOS Signal Group DC Specifications	25
2.7.3.1 Platform Environment Control Interface (PECI) DC Specifications	25
Table 13. PECI DC Electrical Limits	26
2.7.3.2 GTL+ Front Side Bus Specifications	26
Table 14. GTL+ Bus Voltage Definitions	27
2.8 Clock Specifications	27
2.8.1 Front Side Bus Clock (BCLK[1:0]) and Processor Clocking	27
Table 15. Core Frequency to FSB Multiplier Configuration	28
2.8.2 FSB Frequency Select Signals (BSEL[2:0])	28
Table 16. BSEL[2:0] Frequency Table for BCLK[1:0]	29
2.8.3 Phase Lock Loop (PLL) and Filter	29
2.8.4 BCLK[1:0] Specifications	29
Table 17. Front Side Bus Differential BCLK Specifications	29
Table 18. FSB Differential Clock Specifications (800 MHz FSB)	30
Figure 3. Differential Clock Waveform	30
Figure 4. Measurement Points for Differential Clock Waveforms	31
3 Package Mechanical Specifications	33
Figure 5. Processor Package Assembly Sketch	33
3.1 Package Mechanical Drawing	33
Figure 6. Processor Package Drawing Sheet 1 of 3	34
Figure 7. Processor Package Drawing Sheet 2 of 3	35
Figure 8. Processor Package Drawing Sheet 3 of 3	36
3.2 Processor Component Keep-Out Zones	37
3.3 Package Loading Specifications	37
Table 19. Processor Loading Specifications	37
3.4 Package Handling Guidelines	37
Table 20. Package Handling Guidelines	37
3.5 Package Insertion Specifications	38
3.6 Processor Mass Specification	38
3.7 Processor Materials	38
Table 21. Processor Materials	38
3.8 Processor Markings	38
Figure 9. Processor Top-Side Markings Example	38
3.9 Processor Land Coordinates	39
Figure 10. Processor Land Coordinates and Quadrants, Top View	39
4 Land Listing and Signal Descriptions	41
4.1 Processor Land Assignments	41
Figure 11. land-out Diagram (Top View - Left Side)	42
Figure 12. land-out Diagram (Top View - Right Side)	43
Table 22. Alphabetical Land Assignments	44
Table 23. Numerical Land Assignment	54
4.2 Alphabetical Signals Reference	64
Table 24. Signal Description (Sheet 10 of 10)	64
5 Thermal Specifications and Design Considerations	75
5.1 Processor Thermal Specifications	75
5.1.1 Thermal Specifications	75
Table 25. Processor Thermal Specifications	76
Table 26. Processor Thermal Profile	77
Figure 13. Processor Series Thermal Profile	77
5.1.2 Thermal Metrology	78
Figure 14. Case Temperature (TC) Measurement Location	78
5.2 Processor Thermal Features	78
5.2.1 Thermal Monitor	78
5.2.2 Thermal Monitor 2	79
Figure 15. Thermal Monitor 2 Frequency and Voltage Ordering	80
5.2.3 On-Demand Mode	80
5.2.4 PROCHOT# Signal	80
5.2.5 THERMTRIP# Signal	81
5.3 Platform Environment Control Interface (PECI)	81
5.3.1 Introduction	81
5.3.1.1 TCONTROL and TCC activation on PECI-Based Systems	82
Figure 16. Conceptual Fan Control Diagram on PECI-Based Platforms	82
5.3.2 PECI Specifications	82
5.3.2.1 PECI Device Address	82
5.3.2.2 PECI Command Support	82
5.3.2.3 PECI Fault Handling Requirements	83
5.3.2.4 PECI GetTemp0() Error Code Support	83
Table 27. GetTemp0() Error Codes	83
6 Features	85
6.1 Power-On Configuration Options	85
Table 28. Power-On Configuration Option Signals	85
6.2 Clock Control and Low Power States	85
Figure 17. Processor Low Power State Machine	86
6.2.1 Normal State	86
6.2.2 HALT and Extended HALT Powerdown States	86
6.2.2.1 HALT Powerdown State	86
6.2.2.2 Extended HALT Powerdown State	87
6.2.3 Stop Grant and Extended Stop Grant States	87
6.2.3.1 Stop-Grant State	87
6.2.3.2 Extended Stop Grant State	88
6.2.4 Extended HALT Snoop State, HALT Snoop State, Extended Stop Grant Snoop State, and Stop Grant Snoop State	88
6.2.4.1 HALT Snoop State, Stop Grant Snoop State	88
6.2.4.2 Extended HALT Snoop State, Extended Stop Grant Snoop State	88
6.2.5 Sleep State	88
6.2.6 Deep Sleep State	89
6.2.7 Deeper Sleep State	89
6.2.8 Enhanced Intel SpeedStep® Technology	90
6.3 Processor Power Status Indicator (PSI) Signal	90
7 Boxed Processor Specifications	91
7.1 Introduction	91
Figure 18. Mechanical Representation of the Boxed Processor	91
7.2 Mechanical Specifications	92
7.2.1 Boxed Processor Cooling Solution Dimensions	92
Figure 19. Space Requirements for the Boxed Processor (Side View)	92
Figure 20. Space Requirements for the Boxed Processor (Top View)	92
Figure 21. Overall View Space Requirements for the Boxed Processor	93
7.2.2 Boxed Processor Fan Heatsink Weight	93
7.2.3 Boxed Processor Retention Mechanism and Heatsink Attach Clip Assembly	93
7.3 Electrical Requirements	93
7.3.1 Fan Heatsink Power Supply	93
Figure 22. Boxed Processor Fan Heatsink Power Cable Connector Description	94
Table 29. Fan Heatsink Power and Signal Specifications	94
Figure 23. Baseboard Power Header Placement Relative to Processor Socket	95
7.4 Thermal Specifications	95
7.4.1 Boxed Processor Cooling Requirements	95
Figure 24. Boxed Processor Fan Heatsink Airspace Keepout Requirements (side 1 view)	96
Figure 25. Boxed Processor Fan Heatsink Airspace Keepout Requirements (side 2 view)	96
7.4.2 Variable Speed Fan	97
Figure 26. Boxed Processor Fan Heatsink Set Points	97
Table 30. Fan Heatsink Power and Signal Specifications	98
8 Debug Tools Specifications	99
8.1 Logic Analyzer Interface (LAI)	99
8.1.1 Mechanical Considerations	99

Match case Limit results 1 per page

Land Listing and Signal Descriptions

Datasheet

FERR#/PBE#

Output

FERR#/PBE# (floating point error/pending break event) is a

multiplexed signal and its meaning is qualified by STPCLK#. When

STPCLK# is not asserted, FERR#/PBE# indicates a floating-point

error and will be asserted when the processor detects an unmasked

floating-point error. When STPCLK# is not asserted, FERR#/PBE# is

similar to the ERROR# signal on the Intel 387 coprocessor, and is

included for compatibility with systems using MS-DOS*-type

floating-point error reporting. When STPCLK# is asserted, an

assertion of FERR#/PBE# indicates that the processor has a

pending break event waiting for service. The assertion of FERR#/

PBE# indicates that the processor should be returned to the Normal

state. For additional information on the pending break event

functionality, including the identification of support of the feature

and enable/disable information, refer to volume 3 of the

Intel

Architecture Software Developer's Manual

and the

Intel Processor

Identification and the CPUID Instruction

application note.

GTLREF[1:0]

Input

GTLREF[1:0] determine the signal reference level for GTL+ input

signals. GTLREF is used by the GTL+ receivers to determine if a

signal is a logical 0 or logical 1.

HIT#

HITM#

Input/

Output

Input/

Output

HIT# (Snoop Hit) and HITM# (Hit Modified) convey transaction

snoop operation results. Any FSB agent may assert both HIT# and

HITM# together to indicate that it requires a snoop stall, which can

be continued by reasserting HIT# and HITM# together.

IERR#

Output

IERR# (Internal Error) is asserted by a processor as the result of

an internal error. Assertion of IERR# is usually accompanied by a

SHUTDOWN transaction on the processor FSB. This transaction

may optionally be converted to an external error signal (e.g., NMI)

by system core logic. The processor will keep IERR# asserted until

the assertion of RESET#.

This signal does not have on-die termination. Refer to

Section 2.6.2

for termination requirements.

IGNNE#

Input

IGNNE# (Ignore Numeric Error) is asserted to the processor to

ignore a numeric error and continue to execute noncontrol floating-

point instructions. If IGNNE# is de-asserted, the processor

generates an exception on a noncontrol floating-point instruction if

a previous floating-point instruction caused an error. IGNNE# has

no effect when the NE bit in control register 0 (CR0) is set.

IGNNE# is an asynchronous signal. However, to ensure recognition

of this signal following an Input/Output write instruction, it must be

valid along with the TRDY# assertion of the corresponding Input/

Output Write bus transaction.

INIT#

Input

INIT# (Initialization), when asserted, resets integer registers inside

the processor without affecting its internal caches or floating-point

registers. The processor then begins execution at the power-on

Reset vector configured during power-on configuration. The

processor continues to handle snoop requests during INIT#

assertion. INIT# is an asynchronous signal and must connect the

appropriate pins/lands of all processor FSB agents.

If INIT# is sampled active on the active to inactive transition of

RESET#, then the processor executes its Built-in Self-Test (BIST).

Table 24.

Signal Description

(Sheet 5 of 10)

Name

Type

Description