Intel S1200RP Service Guide - Page 104
Enables or disables PCI PME function for Wake on LAN capability from, LAN adapters.
View all Intel S1200RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Server Utilities IOM2 Port4 MAC Address Figure 87. NIC Configuration Screen Screen Field Descriptions: 1. Wake on LAN (PME) Option Values: Enabled Disabled Help Text: LAN adapters. Enables or disables PCI PME function for Wake on LAN capability from Comments: Enables/disables PCI/PCIe PME# signal to generate Power Management Events (PME) and ACPI Table entries required for Wake on LAN (WOL). However, note that this will enable WOL only with an ACPI-capable Operating System which has the WOL function enabled. Back to [NIC Configuration Screen] - [NIC Configuration Screen] - [Advanced Screen] - [Screen Map] 2. PXE 1GbE Option ROM Option Values: Enabled Disabled Help Text: Enable/Disable Onboard/IOM NIC PXE Option ROM Load. Comments: This selection is to enable/disable the 1GbE PXE Option ROM that is used by all Onboard and IO Module 1 GbE controllers. This option is grayed out and not accessible if the iSCSI Option ROM is enabled. It can co-exist with the 10 GbE PXE Option ROM, the 10 GbE FCoE Option ROM, or with an InfiniBand controller Option ROM. If the 1GbE PXE Option ROM is disabled, and no other Option ROM is enabled, the system cannot perform a Network Boot and cannot respond for Wake-on-LAN. This 1GbE PXE option does not appear unless there is a 1 GbE NIC installed in the system as an Onboard or IO Module NIC. Back to [NIC Configuration Screen] - [NIC Configuration Screen] - [Advanced Screen] - [Screen Map] 3. PXE 10GbE Option ROM Option Values: Enabled Disabled Help Text: Enable/Disable Onboard/IOM NIC PXE Option ROM Load. Comments: This selection is to enable/disable the 10GbE PXE Option ROM that is used by all Onboard and IO Module 10 GbE controllers. 92 Intel® Server System R1000RP Service Guide