Intel S1200RP Service Guide - Page 140
Boot Options Screen (Tab), Back to, Disabled, Enabled
View all Intel S1200RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Server Utilities Back to [BMC LAN Configuration Screen] - [Server Management Screen] - [Screen Map] 22. User Status Option Values: Enabled Disabled Help Text: Enable / Disable LAN access for selected user. Also enables/disables SOL, KVM, and media redirection. Comments: Note that status setting is Disabled by default until set to Enabled. Back to [BMC LAN Configuration Screen] - [Server Management Screen] - [Screen Map] 23. User Name Option Values: [Entry Field, 4 - 15 characters] Help Text: Press to edit User Name. User Name is a string of 4 to 15 alphanumeric characters, and must begin with an alphabetic character. User Name cannot be changed for User1 (anonymous) and User2 (root). Comments: User Name can only be edited for users other than "anonymous" and "root". Those two User Names may not be changed. Back to [BMC LAN Configuration Screen] - [Server Management Screen] - [Screen Map] 24. User Password Option Values: [Popup Entry Field, 0 - 15 characters] Help Text: Press key to enter password. Maximum length is 15 characters. Any ASCII printable characters can be used: case-sensitive alphabetic, numeric, and special characters. Note: Password entered will override any previously set password. Comments: This field will not indicate whether there is a password set already. There is no display - just press for a popup with an entry field to enter a new password. Any new password entered will override the previous password, if there was one. Back to [BMC LAN Configuration Screen] - [Server Management Screen] - [Screen Map] Boot Options Screen (Tab) The Boot Options screen displays all bootable media encountered during POST, and allows the user to configure the desired order in which boot devices are to be tried. To access this screen from the Main screen or other top-level Tab screen, press the right or left arrow keys to traverse the tabs at the top of the Setup screen until the Boot Options screen is selected. The first boot device in the specified Boot Order which is present and is bootable during POST will be used to boot the system, and will continue to be used to reboot the system until the boot device configuration has changed (that is, which boot devices are present), or until the system has been powered down and booted in a "cold" power-on boot. Note: USB devices can be "hotplugged" during POST, and will be detected and "beeped". They will be enumerated and displayed on the USB Configuration Setup screen. However, they may not be enumerated as bootable devices, depending on when in POST they were hotplugged. If they were recognized before the enumeration of bootable devices, they will appear as Boot Devices if 128 Intel® Server System R1000RP Service Guide