Intel S1200RP Service Guide - Page 67
Replacing the Redundant Power Supply, Removing the Redundant Power Supply Module
View all Intel S1200RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Hardware Installations and Upgrades Replacing the Redundant Power Supply Caution: The power supply is only hot-swappable if you have a redundant system with two power supplies installed. If you only have one power supply installed, before removing or replacing the power supply, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. The power supply can be replaced if it fails. To replace the power supply, follow these steps: 1. Push the green latch in the direction shown while pulling out of the system by the handle. Figure 69. Removing the Redundant Power Supply Module 2. Insert the power supply module into the power supply cage and push all the way until it clicks into place. Figure 70. Installing the Redundant Power Supply Module Intel® Server System R1000RP Service Guide 55