Home » Intel Manuals » Servers » Intel S1200RP » Manual Viewer

Intel S1200RP Service Guide - Page 97

IntelR ESRT2 LSI, ESRT2 Powered By LSI*: Supports RAID 0/1/10 and optional RAID 5 with Intel

Get Intel S1200RP PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

Server Utilities Enhanced provides Native SATA support using native SATA drivers included with the vast majority of current OSes. AHCI enables the Advanced Host Controller Interface, which provides Enhanced SATA functionality plus possible additional functionality (Native Command Queuing, Hot Plug, Staggered Spin Up). It uses AHCI drivers available for the majority of current OSes. RAID Mode provides host based RAID support on the onboard SATA ports. RAID levels supported and required drivers depend on the RAID stack selected Back to [Mass Storage Controller Configuration Screen] - Back to [Screen Map] 2. AHCI Capable RAID Options Option Values: Intel(R) ESRT2 (LSI*) Intel(R) RSTe Help Text: - Intel® ESRT2 (Powered By LSI*): Supports RAID 0/1/10 and optional RAID 5 with Intel® RAID C600 Upgrade Keys. Uses Intel® ESRT2 drivers (based on LSI* MegaSR). - Intel® RSTe: Provides pass-through drive support. Also provides host based RAID 0/1/10/5 support. Uses Intel® RSTe iastor drivers. Comments: This option only appears when the SATA Controller is enabled, and RAID Mode has been selected as the operational SATA Mode. This setting selects the RAID stack to be used for SATA RAID with the onboard AHCI SATA controller. If a RAID Volume has not previously been created that is compatible with the RAID stack selected, it will be necessary to Save and Exit and reboot in order to create a RAID Volume. Note: This option does not appear on all boards. Back to [Mass Storage Controller Configuration Screen] - Back to [Screen Map] 3. Intel(R) Storage Module Option Values: None Names of Storage Modules supported at this time are: Intel® Integrated RAID Module Intel® Integrated RAID Module RMS25PB040 Intel® Integrated RAID Module RMT3PB080 Intel® Integrated RAID Module RMS25CB080 Intel® Integrated RAID Module RMS25CB040 Intel® Integrated RAID Module RMT3CB080 Intel® Integrated RAID Module RMS25JB080 Intel® Integrated RAID Module RMS25JB040 Intel® Integrated RAID Module RMS25KB080 Intel® Integrated RAID Module RMS25KB040 Help Text: Comments: Information only. If no Intel® Storage Module is detected, then None is displayed. This shows the customer the product name of the module installed, which helps in identifying drivers, support, documentation, etc. Back to [Mass Storage Controller Configuration Screen] - Back to [Screen Map] Intel® Server System R1000RP Service Guide 85

Section	Page
Safety Information	3
Important Safety Instructions	3
Wichtige Sicherheitshinweise	3
Consignes de sécurité	3
Instrucciones de seguridad importantes	3
重要安全指导	3
Warnings	4
Preface	5
About this Manual	5
Manual Organization	5
Additional Information and Software	5
1 Server System Features	13
Server System Feature Overview	14
Server System Components	16
Hot Swap Hard Drive Bay and Front Panel Options	17
Front Panel	18
Back Panel	19
Server Board Components	20
Intel® Light-Guided Diagnostics	22
System Recovery Jumpers	26
Peripheral Devices	28
Hard Disk Drive Carriers	29
Slimline Optical Drive Support	30
Front Bezel	31
Hot-Swap SAS/SATA Backplane	32
4 x 3.5-inch Hard Drive Backplane	32
8 x 2.5-inch Hard Drive Backplane	32
Advanced Management Options	34
Intel® Remote Management Module 4	34
2 Hardware Installations and Upgrades	35
Before You Begin	35
Tools and Supplies Needed	35
System Reference	35
Cable Routing	36
For System with 4 x 3.5\	37
For System with 4 x 3.5\	38
For System with 8 x 2.5\	39
Fan Connections	40
Removing and Installing the Front Bezel	41
Removing the Front Bezel	41
Installing the Front Bezel	41
Removing and Installing the System Cover	42
Removing the System Cover	42
Installing the System Cover	42
Removing and Installing the Air Duct	43
Removing the Air Duct	43
Installing the Air Duct	43
Removing and Installing Processor	44
Removing Processor Heatsink	44
Installing the Processor	44
Installing Processor Heatsink	47
Removing the Processor	48
Installing and Removing Memory	49
Installing Memory	49
Removing Memory	49
Installing and Removing Hot-swap Hard Drive	50
Installing a Hard Disk Drive into 3.5\	50
Installing a Hard Disk Drive into 2.5\	52
Removing and Installing the PCI Riser Assembly	54
Removing the PCI Riser Assembly	54
Installing the PCI Riser Assembly	55
Installing and Removing a PCI Add-in Card	56
Installing a PCI Add-in Card	56
Removing a PCI Add-in Card	56
Replacing a PCI Riser Card	57
Removing a PCI Riser Card	57
Installing a PCI Riser Card	57
Installing and Removing a Slimline Optical Drive	58
Installing a Slimline Optical Drive	58
Removing a Slimline Optical Drive	59
Installing and Removing Intel® I/O Expansion Module	60
Installing Intel® I/O Expansion Module	60
Removing Intel® I/O Expansion Module	60
Installing and Removing the Intel® ESRTII SATA Key	61
Installing the Intel® ESRTII SATA Key	61
Removing the Intel® ESRTII SATA Key	61
Installing and Removing the Intel® Remote Management Module 4	62
Installing the Intel® RMM4 Lite	62
Installing the Intel® RMM4 NIC	63
Removing the Intel® RMM4 Lite	64
Removing the Intel® RMM4 NIC	64
Installing and Removing the Intel® RAID Smart Battery	65
Installing the Intel® RAID Smart Battery	65
Removing the Intel® RAID Smart Battery	65
Replacing the Fixed Power Supply	66
Replacing the Redundant Power Supply	67
Installing and Removing the Server Board	68
Removing the Server Board	68
Installing the Server Board	69
Replacing the Backup Battery	70
Replacing a System Fan	71
Replacing the Backplane	72
Removing the Backplane	72
Installing the Backplane	73
Installing and Removing the Rack Handles	74
Installing the Rack Handles	74
Removing the Rack Handles	74
3 Server Utilities	75
Using the BIOS Setup Utility	75
Starting Setup	75
Setup Navigation Keyboard Commands	75
Setup Screen Menu Selection Bar	76
BIOS Setup Utility Screens	76
Map of Screens and Functionality	77
Main Screen (Tab)	79
Advanced Screen (Tab)	82
Processor Configuration	84
Memory Configuration	92
Mass Storage Controller Configuration	95
PCI Configuration	98
NIC Configuration	101
Serial Port Configuration	109
USB Configuration	110
System Acoustic and Performance Configuration	114
Network Stack (Tab)	117
Security Screen (Tab)	118
Server Management Screen (Tab)	121
Console Redirection	127
System Information	130
BMC LAN Configuration	132
Boot Options Screen (Tab)	140
CDROM Order	146
Hard Disk Order	147
Floppy Order	147
Network Device Order	148
BEV Device Order	149
Add EFI Boot Option	150
Delete EFI Boot Option	152
Boot Manager Screen (Tab)	152
Error Manager Screen (Tab)	153
Save & Exit Screen (Tab)	155
Appendix A: Technical Reference	159
System Environmental Specifications	159
Appendix B: Regulatory and Compliance Information	161
Appendix C: LED Decoder	162
Appendix D: Getting Help	166
Warranty Information	166

Match case Limit results 1 per page

Server Utilities

Intel

Server System R1000RP Service Guide

Enhanced

provides Native SATA support using native SATA drivers included with the vast

majority of current OSes.

AHCI

enables the Advanced Host Controller Interface, which provides Enhanced SATA

functionality plus possible additional functionality (Native Command Queuing, Hot Plug,

Staggered Spin Up). It uses AHCI drivers available for the majority of current OSes.

RAID Mode

provides host based RAID support on the onboard SATA ports. RAID levels

supported and required drivers depend on the RAID stack selected

Back to [

Mass Storage Controller Configuration Screen

]

—

Back to [

Screen Map

]

AHCI Capable RAID Options

Option Values:

Intel(R) ESRT2 (LSI*)

Intel(R) RSTe

Help Text:

- Intel

ESRT2 (Powered By LSI*): Supports RAID 0/1/10 and optional RAID 5 with Intel

RAID C600 Upgrade Keys. Uses Intel

ESRT2 drivers (based on LSI* MegaSR).

- Intel

RSTe: Provides pass-through drive support. Also provides host based RAID 0/1/10/5

support. Uses Intel

RSTe iastor drivers.

Comments:

This option only appears when the SATA Controller is enabled, and

RAID Mode

has been selected as the operational SATA Mode. This setting selects the RAID

stack to be used for SATA RAID with the onboard AHCI SATA controller.

If a RAID Volume has not previously been created that is compatible with the RAID stack

selected, it will be necessary to Save and Exit and reboot in order to create a RAID Volume.

Note

: This option does not appear on all boards.

Back to [

Mass Storage Controller Configuration Screen

]

—

Back to [

Screen Map

]

Intel(R) Storage Module

Option Values:

None

Names of Storage Modules supported at this time are:

Intel

Integrated RAID Module

Intel

Integrated RAID Module RMS25PB040

Intel

Integrated RAID Module RMT3PB080

Intel

Integrated RAID Module RMS25CB080

Intel

Integrated RAID Module RMS25CB040

Intel

Integrated RAID Module RMT3CB080

Intel

Integrated RAID Module RMS25JB080

Intel

Integrated RAID Module RMS25JB040

Intel

Integrated RAID Module RMS25KB080

Intel

Integrated RAID Module RMS25KB040

Help Text:

<None>

Comments:

Information only

. If no Intel

Storage Module is detected, then

None

displayed. This shows the customer the product name of the module installed, which helps in

identifying drivers, support, documentation, etc.

Back to [

Mass Storage Controller Configuration Screen

]

—

Back to [

Screen Map

]