Intel S1200RP Service Guide - Page 106
Enabled, I540 Dual-Port X540 10 Gigabit RJ-45 Module
View all Intel S1200RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Server Utilities 7. Onboard NIC2 Type Option Values: One of these strings: Intel® I210 Dual-Port Gigabit Ethernet Controller Help Text: Comments: Information only. This is a display showing which NICs are available as Network Controllers integrated into the baseboard. Each of these Onboard NICs will be followed by a section including a group of options that are specific to the type of NIC, either as an Ethernet controller or an InfiniBand controller. If a board only has one onboard NIC, the second NIC Type and following options section will not appear. For details about the NIC hardware configuration for a specific board, refer to the Technical Product Specification for that board. Back to [NIC Configuration Screen] - [NIC Configuration Screen] - [Advanced Screen] - [Screen Map] 8. IO Module 1 Type 9. IO Module 2 Type Option Values: One of these strings: Intel® I350 Quad-Port Gigabit Ethernet Module Intel® I540 Dual-Port X540 10 Gigabit RJ-45 Module Intel® 82599 Dual-Port 10 Gigabit SFP+ Module Mellanox* ConnectX-3* Single-Port InfiniBand FD14 Module Help Text: Comments: Information only. This is a display showing which Network Controllers on IO Modules are installed on the baseboard. Each of these IO Module NICs will be followed by a section including a group of options that are specific to the type of NIC, either as an Ethernet controller or an InfiniBand controller. This descriptive screen image shows an example of an InifiniBand controller as IOM1. In a system with two IO Module connectors, an InfiniBand IO Module might be installed as either IOM1 or IOM2. Most boards have only one IO Module connector. In any case, an IO Module Type and following options section will only appear when an IO Module is installed, and a second IO Module Type and options section will only appear if there are two IO Modules installed. For details about the NIC hardware configuration for a specific board, refer to the Technical Product Specification for that board. Back to [NIC Configuration Screen] - [NIC Configuration Screen] - [Advanced Screen] - [Screen Map] 10. NIC1 Controller 11. NIC2 Controller Option Values: Enabled Disabled 94 Intel® Server System R1000RP Service Guide