Intel S1200RP Service Guide - Page 26
System Recovery Jumpers - firmware
View all Intel S1200RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Server System Features System Recovery Jumpers Figure 11. Configuration Jumpers Note: 1. For safety purposes, the power cord should be disconnected from a system before removing any system components or moving any of the on-board jumper blocks. 2. System Update and Recovery files are included in the System Update Packages (SUP) posted on http://www.intel.com/support/. Table 6. Server Board Jumpers Jumper Name J3K6: BMC Force Update J2K8: BIOS Recovery J2K6: BIOS Default J3K2: ME Force Update Pins System Results 1-2 BMC Firmware Force Update Mode - Disabled (Default) 2-3 BMC Firmware Force Update Mode - Enabled 1-2 Pins 1-2 should be jumpered for normal system operation. (Default) 2-3 The main system BIOS does not boot with pins 2-3 jumpered. The system only boots from EFIbootable recovery media with a recovery BIOS image present. 1-2 These pins should have a jumper in place for normal system operation. (Default) 2-3 If pins 2-3 are jumpered with AC power plugged in, the CMOS settings clear in 5 seconds. Pins 2-3 should not be jumpered for normal system operation. 1-2 ME Firmware Force Update Mode - Disabled (Default) 2-3 ME Firmware Force Update Mode - Enabled 14 Intel® Server System R1000RP Service Guide