Intermec PM43/PM43c PM23c, PM43, and PM43c Mid-Range Printer User Manual - Page 119
How to Adjust the Printer, Prevent Ribbon Wrinkling
View all Intermec PM43/PM43c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Chapter 6 - Maintain the Printer 6 Insert the new platen roller into the printer and secure it by turning the latch counterclockwise. 7 Reload media and turn the printhead lift lever clockwise to lower it. 8 Close the media cover, reconnect power, and turn on the printer. How to Adjust the Printer You may need to adjust your printer to accommodate how you are printing or to improve printer performance. You can make these adjustments on the printer: • Ribbon wrinkling • Printhead balance • Printhead pressure • Label taken sensor • Label gap sensor and label mark sensor Prevent Ribbon Wrinkling If you have problems with the thermal transfer ribbon getting wrinkled, try adjusting the ribbon tension bar. 1 Open the media cover. PM23c, PM43, and PM43c Mid-Range Printer User Manual 105