Intermec PM43/PM43c PM23c, PM43, and PM43c Mid-Range Printer User Manual - Page 39
Set Up the Printer, PM23c, PM43, and PM43c Mid-Range Printer User Manual
View all Intermec PM43/PM43c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 2 - Set Up the Printer 2 Turn the printhead lift lever counterclockwise to raise the printhead. 3 Load a media roll onto the media supply hub. Make sure you push the roll all the way against the inner wall of the printer and adjust the edge guide and the dancer guide to hold the media in place. 4 Route the media through the print mechanism. 5 Adjust the printhead balance. For help, see Chapter 6. 6 Turn the printhead lift lever clockwise to close the printhead. PM23c, PM43, and PM43c Mid-Range Printer User Manual 25
Chapter 2 — Set Up the Printer
PM23c, PM43, and PM43c Mid-Range Printer User Manual
25
2
Turn the printhead lift lever counterclockwise to raise the
printhead.
3
Load a media roll onto the media supply hub. Make sure you push
the roll all the way against the inner wall of the printer and adjust
the edge guide and the dancer guide to hold the media in place.
4
Route the media through the print mechanism.
5
Adjust the printhead balance. For help, see Chapter 6.
6
Turn the printhead lift lever clockwise to close the printhead.