Intermec PM43/PM43c PM23c, PM43, and PM43c Mid-Range Printer User Manual - Page 143
Ethernet Settings, Settings > Communications, > Ethernet, Con
View all Intermec PM43/PM43c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Appendix B - Default Settings Serial Port Settings (Continued) Setting ENQ/ACK XON/XOFF To XON/XOFF From New Line Character Description Default Specifies if software flow control Disable (ENQ/ACK) is used to manage the rate of data transmission between the device and the host. Specifies if software flow control Disable (XON/XOFF) is used to manage the rate of data transmission to the host. Specifies if software flow control Disable (XON/XOFF) is used to manage the rate of data transmission from the host. Defines the characters that the printer CR/LF echoes to the host to indicate that it has moved to a new line. Ethernet Settings This section describes the Ethernet IPv4 and IPv6 settings. To view these settings: • From the printer Main Menu, select Settings > Communications > Ethernet. • From the printer web page, click the Configure tab, Communications > Ethernet. Ethernet Settings Setting Description Default (IPv4) IP Assignment Method Specifies how the printer obtains an IP DHCP address. (IPv4) IP Address Subnet Mask Specifies the unique network-level address that is assigned to each device in a TCP/IP network (IPv4). Specifies a number that defines the range of IP addresses that can be used in a TCP/IP network. 0.0.0.0 0.0.0.0 PM23c, PM43, and PM43c Mid-Range Printer User Manual 129