Intermec PM43/PM43c PM23c, PM43, and PM43c Mid-Range Printer User Manual - Page 33
Set the Command Language from the Main Menu, Printer Options and Accessories
View all Intermec PM43/PM43c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 1 - About the Printer 2 On your PC, open a browser. 3 In the Location or Address bar, type the printer IP address and press Enter. The printer web page appears. 4 Click Login. The Login page appears. 5 Type your Username and Password and click Login. The default username is itadmin and the default password is pass. 6 Click the Configure tab. 7 Click System Settings > General. 8 Select a different printer command language from the Command Language list, and then click Save. 9 Click the Services tab. 10 Click Reboot Printer, and then click Reboot. The printer restarts in the command language you selected. Set the Command Language from the Main Menu If you have a full touch printer, you can use this procedure to change the printer command language from the Main Menu. 1 From the Ready screen, press the Main Menu button. 2 From the Main Menu, pressSettings > System Settings > General. 3 Scroll down until you reach Command Language. 4 Use the horizontal scroll bar to select the command language you want to use and then save your change. 5 Turn the printer off and then on. The printer starts up in the command language you selected. Printer Options and Accessories You can use these printer options and accessories (sold and ordered separately) with the PM23c, PM43, and PM43c printers. Most options are either installed at the factory or can be installed by factory service technicians in the field. Accessories are designed to be installed by the customer. PM23c, PM43, and PM43 Mid-Range Printer User Manual 19