Intermec PM43/PM43c PM23c, PM43, and PM43c Mid-Range Printer User Manual - Page 158
System Maintenance Alert Settings, Continued, Faulty Dot
View all Intermec PM43/PM43c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Appendix B - Default Settings System Maintenance Alert Settings (Continued) Setting Replace Printhead Clean Printhead Faulty Dot Ribbon Low Diameter Description Default Sets the length of media (in meters) that the 0 printer prints before the Replace Printhead alert is sent, if this alert is configured. Unit of measurement is defined in the Unit of Measure parameter. Range is 0 to 4294967295. Sets the length of media (in meters) that the 0 printer prints before the Clean Printhead alert is sent, if this alert is configured. Unit of measurement is defined in the Unit of Measure parameter. Range is 0 to 4294967295. Sets the number of faulty dots on the 0 printhead before the Faulty Dot alert is sent, if this alert is configured. Range is 0 to 4294967295. Sets the minimum diameter of the ribbon 0 roll before the Ribbon Low alert is sent, if this alert is configured. Range is 0 to 200 mm. 144 PM23c, PM43, and PM43c Mid-Range Printer User Manual