Intermec PM43/PM43c PM23c, PM43, and PM43c Mid-Range Printer User Manual - Page 157
System Maintenance Alert Settings, Settings > System Settings >, Maintenance Alerts, Con
View all Intermec PM43/PM43c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Appendix B - Default Settings System Network Services (Continued) Service IKEv2 SSH Telnet XML Description Default Determines if the printer can use IKEv2. Disable Determines if the printer can use Secure Socket Enable Handling (SSH). Determines if the printer can use Telnet. Enable Determines if the printer can use XML printing. Enable System Maintenance Alert Settings This section describes the system maintenance alert settings, such as the odometer distance. To view these settings: • From the printer Main Menu, select Settings > System Settings > Maintenance Alerts. • From the printer web page, click the Configure tab, System Settings > Maintenance Alerts. System Maintenance Alert Settings Setting Description Default Odometer (User Resettable) Sets the length of media (in meters) that the 0 printer prints before the Odometer (User Resettable) alert is sent, if this alert is configured. Unit of measurement is defined in the Unit of Measure parameter. Range is 0 to 4294967295. Odometer (Printer) Sets the length of media (in meters) that the 0 printer prints before the Odometer (Printer) alert is sent. Unit of measurement is defined in the Unit of Measure parameter. Range is 0 to 4294967295. Odometer (Current Printhead) Sets the length of media (in meters) that the 0 printer prints before the Odometer (Current Printhead) alert is sent, if this alert is configured. Unit of measurement is defined in the Unit of Measure parameter. Range is 0 to 4294967295. PM23c, PM43, and PM43c Mid-Range Printer User Manual 143