JVC DD-3 Instructions - Page 103
Press [SETTING]., Selecting the monitor out type
UPC - 046838029998
View all JVC DD-3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Preparation 3 Press 2 or 3 to select the video signal type suitable for the TV. • When the TV is connected to the [VIDEO] terminal or the [S-VIDEO] terminal, the video signal type can be selected as instructed below. - Select "PAL 576I" for a TV only compatible with PAL interlaced video signal. - Select "PAL 576P" for a TV equipped with a component terminal and compatible with PAL progressive video signal. - Select "NTSC 480I" for a TV only compatible with NTSC interlaced video siginal. - Select "NTSC 480P" for a TV equipped with a component terminal and compatible with NTSC progressive video signal. • When the TV is connected to the [HDMI] terminal, the video signal type can be selected as instructed below. (Only for DD-8 and DD-3) - Select "AUTO" for normal usage (the initial setting).* - Select "PAL 576P", "PAL 720P", "NTSC 480P" or "NTSC 720P" as needed. NOTE * The "AUTO" setting works only for a TV compatible with PAL video signal. Select "NTSC 480P" or "NTSC 720P" for a TV equipped with an HDMI terminal and compatible with NTSC video signal. • "480", "576" and "720" refer to the number of the scanning lines. Generally, the larger the number, the better picture that can be obtained. • "I" refers to the interlaced format. "P" refers to the progressive format. A better picture can be obtained in the progressive format than in the interlaced format. • When an HDMI video signal is output, the "HDMI" indicator lights up in the display window. • When an HD video signal (720p) is output, the "HD" indicator lights up. • When "PAL 576P", "PAL 720P", "NTSC 480P" or "NTSC 720P" is selected, the "PROGRESSIVE" indicator lights up in the display window. 4 Press [ENTER]. • The selected video signal type is displayed in the display window for a short time. NOTE • The picture may be distorted when you press [ENTER], but this is not a malfunction of the system. • To check the compatibility of your TV, contact your local JVC customer service center. • All JVC-manufactured progressive TVs and high-definition TVs are fully compatible with this system. • Even if the main unit is turned off, the video signal type setting is stored. Selecting the monitor out type To view an image on the TV, select the monitor out type as well as the video signal type. 1 Press [SETTING]. 2 Press 5 or / to display "M.OUT". 3 Press 2 or 3 to select "HDMI" or "NO HDMI". • When using an HDMI cable to connect a TV to the main unit, select "HDMI". • When an HDMI cable is not connected, select "NO HDMI" (the initial setting). 4 Press [ENTER] or wait for a short time. 14