JVC DD-3 Instructions - Page 157
IP addresses automatically. Another possi, bility is that the IP addresses may
UPC - 046838029998
View all JVC DD-3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Confirming the connection to the computer If "CyberLink Media Server" is not displayed The main unit may not detect the CyberLink Media Server for any of the following reasons. Determine the reason by referring to A and B shown below. A The Ethernet cable may not be connected properly. Possible cause: The Ethernet cable may be of the wrong type (a crossover cable may be used) or may not be connected securely. Possible solution: Refer to "Connecting the main unit to the router" on page 6 to check that the Ethernet cable is a straight-through cable and is connected securely. B You may be using a router that requires the IP addresses to be set up manually. Possible cause: The router connected to the main unit may not have a DHCP function that assigns the IP addresses automatically. Another possibility is that the IP addresses may be assigned manually without using the DHCP function of the router. Possible solution: The IP address of the main unit must be set up manually. Click [Cancel] to close the display on the computer screen and exit CyberLink Media Server. Next, assign the IP address to the main unit referring to "Setting up the IP address" on page 11. 10