JVC DD-3 Instructions - Page 162
Enter the subnet mask using
UPC - 046838029998
View all JVC DD-3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Setting up the IP address 8 Enter the IP address using the number buttons. Confirm the IP address you have written down in the column on page 13. Enter the same values of the IP address of the computer into the first, second and third group of digits (the first, second and third numerical blocks from the left). Enter an arbitrary value (1 - 254) other than the one used in the IP address of the computer into the fourth group of digits (the first numerical block from the right). Example for setup: IP address of the computer IP address of the main unit 192.168. 0. 3 (=192.168.000.003) 192.168.000.004 The first group The second group The third group The fourth group (Only this value should be different from the one of the computer IP address.) Note that the fourth group of digits should be different from the ones of other devices connected to the network. 9 Press [ENTER]. 10 Press / to select "STATIC SUB- NET MASK" and then press [ENTER]. 11 Enter the subnet mask using the number buttons. Confirm the subnet mask you have written down in the column on page 13, and then enter the same value. Example for setup: Subnet mask of 255.255.255. 0 the computer (=255.255.255.000) Subnet mask of the main unit 255.255.255.000 12 Press [ENTER]. 13 Press / to select "APPLY NOW" and then press [ENTER]. The settings are stored. You have finished setting up the IP address of the main unit. Return to page 8. NOTE • Usually, you do not have to set "DEFAULT GATEWAY". For normal usage, leave the initial setting unchanged. Set "DEFAULT GATEWAY" only when you want to play back files stored on a computer that belongs to another network. 15