JVC DD-3 Instructions - Page 11

Preparation English Connecting the speakers Assembling the speaker stands (DD-8) The speakers for DD-8 must be assembled to the speaker stands before the speakers can be connected to the subwoofer. Follow the diagrams below. Left and right speakers Center surround speaker ■ CAUTION • The left and right speakers for DD-8 are considerably heavy. Care must be taken in carrying and handling them. Injury to personnel or damage to devices may result if the left/right speaker falls. Speaker body Speaker stand Mount the speaker body perpendicular to the speaker stand. Use the supplied M4 x 25-mm (1″) screws (3) to fasten each speaker to its speaker stand. Red Use the supplied M5 x 14-mm ( 5 8 ″) screws (2) to fasten the speaker stand. ■ CAUTION • The center surround speaker for DD-8 can be installed on a wall. • Be sure to have the speaker installed on the wall by qualified personnel. • DO NOT install the speaker on the wall by your- self to avoid unexpected damage from it falling off the wall due to incorrect installation or weakness in wall structure. • Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage to devices may result if the installed speaker interferes with daily activities. Black Black line Left/right speaker cable (supplied) Remove the screw and the terminal cover. After connecting the speaker cables, reattach the terminal cover to the speaker body and tighten the screw. 6