Home » JVC Manuals » Video Cameras » JVC GY-DV700WUCL » Manual Viewer

JVC GY-DV700WUCL Instruction Manual - Page 37

Using an Anton-Bauer Battery Pack

Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

4-2 Battery Pack Operation (Cont'd) 4. POWER SUPPLY Using an Anton-Bauer Battery Pack To use an Anton-Bauer battery pack (Propack 13/14, Trimpack 13/14, Magnum 13/14, Compack 13/14 Series), it is necessary to detach the battery case from the GY-DV700W and replace it with the Anton-Bauer battery holder. Use the following battery holder. • Battery holder: Anton-Bauer QRQ27 Detaching the Battery Case From the GY-DV700W and Attaching The Anton-Bauer Battery Clamp 1. Black screw A 1. Remove the two black screws A on the battery case. 2. Remove the lower half of the battery case cover in the downward direction. 3. Connector Connector Compartment 3. Mount screw B 3. Mount screw B 3. To remove the battery case, remove the four screws B fixing the battery case and the connector connecting the battery case to this unit. Anton-Bauer Battery holder 4. Connect the connectors protruding from the GY-DV700W with the connectors on the battery holder. * Following connection of the connectors, insert them into the connector compartment and secure with the clamp. 5. Secure the battery holder to the GY-DV700W with the four mount screws provided with the battery holder. * Take care not to pinch the wires. This could result in damage. Attaching and Detaching an Anton-Bauer Battery Pack Release lever Side panel with display Guide pins Cassette cover side panel Guide holes (x3) Battery pack (Trimpack) Release lever LIGHT ON OFF COUNTER CTL TC UB Battery Attaching the Battery Pack 1. Align the 3 guide pins of the battery pack with the guide holes on the battery holder, and push straight to insert the battery pack. The battery cannot be attached properly if the guide pins are not inserted straight. 2. Slide the battery pack toward the side panel where the cassette cover is located until it clicks. Now the battery pack has been attached. Detaching the Battery Pack Ⅲ While pushing and holding the release lever, slide the battery pack toward the side panel where the LCD display is located, then pull the battery pack outward to remove. 37

Section	Page
IMPORTANT SAFEGUARDS	2
SAFETY PRECAUTIONS	3
MAIN FEATURES	4
CONTENTS	5
1. INTRODUCTION	6
1-1 Main Unit Configuration	6
1-2 Precautions for Proper Use	7
1-3 Routine and Periodical Maintenance	7
1-4 Precautions for Use of Head Cleaning Tape	8
1-5 Videocassette to be Used	9
1-6 Battery Pack to be Used	9
1-7 Condensation	9
1-8 Characteristic CCD Phenomena	9
2. CONTROLS, INDICATORS AND CONNECTORS	10
2-1 Front Section	10
2-2 Right Side Section	12
2-3 Left Side Section	18
2-4 Top Section	19
2-5 Rear Section	20
2-6 Counter Display Contents	22
2-7 Lens (optional)	23
2-8 1.5-Inch Viewfinder (optional)	24
2-9 Indications in Viewfinder	25
3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS	30
3-1 Basic System	30
3-2 Attaching the Zoom Lens (optional)	31
3-3 Attaching the Viewfinder (optional)	31
3-4 Attaching the Microphone (provided)	32
3-5 Attaching the Microphone (optional)	32
3-6 Attaching the Tripod Base (provided)	33
3-7 Inserting and Replacing Backup Lithium Batteries	34
4. POWER SUPPLY	35
4-1 AC Operation	35
4-2 Battery Pack Operation	35
5. PREPARATIONS	39
5-1 Turning the Power ON FUJINON TV ZOOM	39
5-2 Cassette Loading and UnLoading	40
5-3 Setting the Date and Time	41
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING	42
6-1 Camera Settings	42
6-2 Viewfinder Adjustment	43
6-3 External Monitor Adjustment	43
6-4 Back Focus Adjustment	44
6-5 White Balance Adjustment	45
6-6 Switch Settings of the VCR Section	46
6-7 Screen Size Mode Selection (16:9 Picture or 4:3 Picture)	46
6-8 Audio Input Signal Selection	47
6-9 Audio Input Level Adustment	48
6-10 Monitoring Audio during Recording	49
7. SHOOTING OPERATION C 16 16 11 11 8 5.6 5.6 1.5 1.5 5 2 7 10 10 3 5 15 15 10 10 30 30 ∞ m ft 8.7 8.7 20 20 FUJINON FUJINON TV . TV . ZOOM ZOOM C 16 11 8 5.6 1.5 5 2 7 10 3 5 15 10 30 m ∞ ft 8.7 20 FUJINON TV - ZOOM	50
7-1 Basic Recording Operation	50
7-2 VCR Save Mode	52
7-3 If Unit is Left in Record-Pause (Standby) Mode	52
7-4 Checking Recorded Contents in Record-Pause Mode (Recording Check Function)	53
8. PLAYBACK MODE FUJINON FUJINON TV . TV . ZOOM ZOOM	54
8-1 Playback Procedure	54
8-2 Fast-Forward, Rewind	55
8-3 Search	55
9. TIME CODE OPERATION	56
9-1 Displaying Time Code	56
9-2 Presetting and Recording of Time Code	56
9-3 Recording Time Codes by Slave-Locking the Built-in Time Code Generator with the External TCG	58
9-4 Recording Time Coedes in Continuation of Codes Recorded on Tape	59
9-5 Reproducing Time Codes	59
10. S.S.F. (Super Scene Finder) FUNCTION	60
10-1 Explanation of the S.S.F. Function	60
10-2 How to Use the S.S.F. Function	61
10-3 Deleting S.S.F. Data	62
10-4 Resetting S.S.F. Data	62
10-5 Writing S.S.F. Data to Tape 1.5 5 2 7 3 5 15 10 30 • m written	63
10-6 Outputting S.S.F. Data	63
11. USING EXTERNAL COMPONENTS	64
11-1Connecting a Video Component with DV Connector	64
11-2Connecting a PC	65
12. SETUP MENU	66
12-1 VCR Setup Menu	66
12-2 Camera Menu Screen Flow	70
12-3 How to Select from the Camera Menu	71
12-4 VF Display Screen	72
12-5 OPERATION Screen	73
12-6 PROCESS Screen	74
12-7 ADVANCED PROCESS Screen	75
12-8 SKIN COLOR ADJUST Screen	75
12-9 FILE MANAGE Screen	76
12-10 SETUP Screen	77
12-11 Resetting of Camera Menu Setting Values	78
13. FEATURES OF THE CAMERA SECTION	79
13-1 Full-Time Auto White Balance (FAW)	79
13-2 IRIS (Brightness) Adjustment	80
13-3 Shooting the Screen Image on Computer Monitor C 16 11 8 5.6 1.5 1.5 5 2 7 10 10 3 5 15 15 10 10 30 30 • m ft ft 8.7 8.7	81
13-4 Gain (Sensitivity) Adjustment	82
13-5 Switch Setup According to Illumination and Subject	83
13-6 How to Use Skin Tone Detail	84
14. OTHERS	86
14-1 Troubleshooting	86
14-2 Hour Meter Display	92