JVC GY-DV700WUCL Instruction Manual - Page 65
-2Connecting a PC, Connections, Settings
View all JVC GY-DV700WUCL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
11-2Connecting a PC PUSH 11. USING EXTERNAL COMPONENTS DV CAMCORDER GY-DV700W DV connector Y/C OUT MONITOR OUT LINE OUT CH-1 CH-2 TC IN TC OUT SYNC IN TEST OUT VTR REMOTE MIC IN LENS VTR REMOTE connector MONITOR OUT connector AUDIO OUT RS-232C TTL RS-232C converter cable (Optional VC-P893) RS-232C AUDIO IN VIDEO IN PC Non-linear editing controller DV connector Perform the following settings when connecting the unit to a Non-linear editing controller, etc. Connections Connect the GY-DV700W's VTR REMOTE connector to the RS-232C connector on the PC or the non-linear editing controller using the TTL ⇔ RS-232C converter cable. Or connect the GY-DV700W's DV connector and the DV connector of the non-linear editing controller using a DV cable. For compatible non-linear editing controller, consult with your JVC dealer. Settings • To remote control the PC or non-linear editing controller by means of RS-232C, set the VCR Setup Menu item No. 050 REMOTE SELECT to "RS232C". See page 68. • To remote control the GY-DV700W's VCR using the DV connector's IEEE1394 option, set the VCR Setup Menu item No. 050 REMOTE SELECT to "IEEE1394". See page 68. Note: • When a cable is connected to the VTR REMOTE connector, the VTR Setup Menu is not displayed in the viewfinder. Make settings on the VTR Setup Menu while the cable is not connected. • When a cable is connected to the VTR REMOTE connector, the VCR operation mode will not be displayed correctly on the Status 1 screen in the viewfinder. Ⅲ The S.S.F. data stored in the memory of the unit or at the beginning of the tape can be output through the VTR REMOTE terminal. See page 63. 65