JVC GY-DV700WUCL Instruction Manual - Page 73

12-5 OPERATION Screen 12. SETUP MENU Item ASPECT RATIO Function, Operation Variation Range Initial Setting Sets the image size of the video signal. 16:9 16:9 16:9 16:9 aspect ratio image output. When this setting is selected, an 4:3 ID signal for identifying the WIDE screen mode is also output. 4:3 4:3 aspect ratio image output. Note: • When the image size is set by a designated lens, such as the A19x8.7BW, the setting on the lens has priority. • When the REMOTE SELECT item is set to IEEE1394 or RS232C, ASPECT RATIO will be fixed and "FIX" is displayed. SHUTTER The SHUTTER button on the right side section is used to select STEP for fixed shutter speed or V.SCAN variable scanning rate for shooting computer monitor screens. STEP Enables setting of different fixed shutter speeds. [1/100, 1/250, 1/500, 1/1000, 1/2000] VARIABLE ....... Selected when shooting computer monitor screens, etc. [Variable range: 60.1 to 2067.0 Hz] STEP VARIABLE STEP FAW Selects the W.BAL switch (@ on page 13) position to which the FAW (FullTime Auto White Balance Adjustment) function is to be assigned. NONE FAW function is not used. A FAW is assigned to the A position. B FAW is assigned to the B position. PRESET ......... FAW is assigned to the PRESET position. NONE A B PRESET NONE GAIN L GAIN M GAIN H SMOOTH TRANS Selects the gain value in each position of the GAIN switch (9 on page 13). -3dB 0dB 3dB 6dB 9dB 12dB 18dB ALC Smoothens the transition when the GAIN switch (9 on page 13), or WHT.BAL switch (@) is switched over and achieves gradual change in place of sudden change. However, the smooth transition function does not function when switching the GAIN switch set in ALC, FAS button and the LOLUX button. ON Activates the smooth transition function. OFF Deactivates the smooth transition function. ON OFF L: 0dB M: 9dB H: 18dB OFF PAGE BACK The CAMERA MENU returns when the SHUTTER dial is pressed with the - - cursor at this position. 73