JVC GY-DV700WUCL Instruction Manual - Page 69

12-1 VCR Setup Menu (Cont'd) 12. SETUP MENU Group SYSTEM TIME CODE ON SCREEN Item Setting Value Upper row: Viewfinder display Lower row: Counter display indication 302: BACK SPACE STANDARD QUICK b-SP St qU Contents Selection of amount of back space for recording pause. STANDARD : Normally use this setting. QUICK : Compared to STANDARD, the back space becomes approximately 0.4 seconds shorter. Use this setting when you want to start shooting quickly. However, in the REGEN mode, the time code may not continue. Factory Setting STANDARD 307: LONG PAUSE TIME LGPt 3MIN 30MIN 03 30 To select the time (minutes) before the save mode (drum head rotation stopped) is engaged when the record-pause, still or stop condition continues. 3MIN : 3 minutes 30MIN : 30 minutes * When used in a cold environment, the setting will be 3 minutes regardless of the setting. 30MIN 396: BATTERY TYPE bAtt 12V 13.2V 14.4V 12 13 14 To be set in accordance with the used battery back type. 12V 12V : Choose this setting when using 12V battery (12V DC Flat shape type). 13.2V : Choose this setting when using 13.2V battery (Anton-Bauer Trimpack 13, Propack 13, Magnum 13, Compack 13). 14.4V : Choose this setting when using 14.4V battery (Anton-Bauer Trimpack 14, Propack 14, Magnum 14, Compack 14). Note: • If this setting is neglected, the unit's display of remaining of battery power and generation of battery alarm will not work correctly. • This setting is valid when battery pack is used. It is invalid when a DC power supply is used. 398: SSF MODE SSF 399: REMOTE FF/REW MODE rEFF 403: U-BIT SLAVE UbSL 416: NON DROP/ DROP tcG 516: DISPLAY SELECT diSP OFF CUE MODE MARK MODE oF cU nr Selection of the S.S.F. (Super Scene Finder) mode. S.S.F. function:While recording, the time code data of a desired recorded scene is stored in the unit's memory when the TAKE button on the front section is pressed. Settings cannot be changed during recording or SAVE mode. OFF : S.S.F. function is not available. CUE MODE : Selects the CUE mode. When the TAKE button is pressed, the time code data of the scene recorded at that point is stored in the memory. MARK MODE : Selects the MARK mode. When the TAKE button is pressed the first time, the time code of this point is stored as start point of the scene. When the TAKE button is pressed the second time, the time code of this point is stored as ending point of the scene. For details on the S.S.F. function, see page 60. • When the VCR Setup Menu item No. 398 S.S.F. MODE is set to CUE or MARK, the time code generator's running method is internally set to the REGEN mode. OFF FF/REW SEARCH FF SH Specifies the operation when FF/REW signal is received from the VTR remote connector during playback. FF/REW : FF/REW operation performed. SEARCH : Search operation performed. FF/ REW TC&UB TC on oF DROP NON DROP dF nF To set whether user's bits also should be slave-locked when slave-locking with external time code generator. TC&UB : User's bits also slave-locked TC : User's bits are not slave-locked Selection of the time code generator's framing mode as either drop or non-drop mode. DROP :The internal time code generator runs in drop mode. Choose this setting when emphasizing the recorded time. NON DROP:The internal time code generator runs in non drop mode. Choose this setting when emphasizing the frame number. TC CLOCK tc cL Selection of the appearance of the counter display when the COUNTER switch is set to "TC" or "UB". TC : The time code is displayed. CLOCK : The date/time is displayed. TC DROP TC 69