JVC GY-DV700WUCL Instruction Manual - Page 39
PREPARATIONS, 5-1 Turning the Power ON FUJINON TV ZOOM, Turning the Power
View all JVC GY-DV700WUCL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
5. PREPARATIONS 5-1 Turning the Power ON TV . ZOOM C 16 11 8 5.6 20 M m 8.7 30 ∞ ft O FILTER 1 3200k 2 5600k+1/8ND 3 5600k 4 5600k+1/64ND SHUTTER STATUS A CR MENU ALARM MONITOR AUTO IRIS FULL AUTO BLACK BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS LOLUX PRST A B ON KNEE OFF AUTO BARS CAM HML SAVE STBY VTR GAIN OUTPUT WHT.BAL NG POWER ON OFF OPERATE/WARNING RESET MONITOR SELECT CH-1 AUDIO CH-2 LEVEL LIGHT ON OFF COUNTER CTL TC UB 10 5 7 10 15 ASPHERIC & IF 19x 3 2 5 1.5 FUJINON AUTO IRIS FULL AUTO BLACK BACK L NORMAL SPOT L STRETCH NORMAL COMPRESS LOLUX PRST A B ON KNEE OFF AUTO BARS CAM HML SAVE STBY VTR GAIN OUTPUT WHT.BAL NG POWER ON OFF 2. 1. VTR switch POWER switch 1. Turn the POWER switch to ON. Ⅲ The power is then supplied to the unit. • Video image is output to the viewfinder. • The display of the VCR section is turned on. 2. Select the GY-DV700W operation mode with the VTR switch. • The GY-DV700W operation mode may differ when the power is turned ON and when the cassette is loaded depending on the setting of the VTR switch as follows: VTR switch setting SAVE GY-DV700W operation mode GY-DV700W enters the SAVE mode (tape protect mode) and stops the drum motor. "SAVE" is displayed in the VCR operation indicating section of the Status 1 mode screen in the viewfinder. In this mode, the tape is effectively protected. In this condition, press the VTR trigger button to start recording. However, it takes longer for the operation to take place from this condition than from the STBY mode. STBY When a recordable videocassette is loaded, the GY-DV700W enters the record-pause mode automatically. (The drum motor is still rotating.) "STBY" is displayed on the Status 1 screen in the viewfinder. In this condition, pressing the VTR trigger button starts recording immediately. CAUTION: Wait at least 5 seconds before turning the power ON again once it has been turned OFF. When the power is turned OFF, the unit automatically enters the tape protect mode. It takes approximately 5 seconds to enter the tape protect mode. Do not turn the power ON again within this interval. 39