JVC HR-S9911U Instructions - Page 24

Editing with Another VCR You can use your VCR as the playback or recording VCR. Refer also to the other components' instruction manuals for connection and its operations. A Make connections Example 1: When another VCR is VHS VCR Connect two VCRs with the supplied audio/video cable. This VCR To AUDIO/VIDEO IN To AUDIO/VIDEO OUT Example 3: When another VCR is S-VHS VCR and when using this VCR as the recording VCR This VCR (for recording) To AUDIO input To S-VIDEO input Audio cable (not supplied) S-video cable (supplied) When using this VCR as the recording VCR, connect this VCR's AUDIO/VIDEO IN connectors to the audio/video output connectors on another VCR. When using this VCR as the playback VCR, connect this VCR's AUDIO/VIDEO OUT connectors to the audio/video input connectors on another VCR. To audio/video output To audio/video input Another VCR ● If another VCR is monaural, connect this VCR's AUDIO L IN (or OUT) connector to the audio output (or input) connector on another VCR. Example 2: When another VCR is S-VHS VCR and when using this VCR as the playback VCR This VCR (for playback) To AUDIO OUT To S-VIDEO OUT Audio cable (not supplied) S-video cable (supplied) To audio input To S-video input Another VCR (for recording) To audio output To S-video output Another VCR (for playback) B Load cassettes Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR. C Select input location on recording VCR Select the correct external input location on the recording VCR. On this VCR (when using this VCR as the recording VCR); Select "L-1" -when connecting the other VCR to the audio/video (or S-video) input connectors on the rear panel. Select "F-1" -when connecting the other VCR to the audio/video (or S-video) input connectors on the front panel. On the VCR Press CH+/- or push the ADVANCED JOG dial, then turn it to the left or right until "L-1" or "F-1" appears on the display panel. On the Remote Press AUX and/or CH+/- until "L-1" or "F-1" appears on the display panel. D Select video input connector on recording VCR When using this VCR as the recording VCR, select the appropriate mode depending on the connector being used (੬ pg. 21). When using S-VIDEO input connector on the front panel, set "FRONT AUX INPUT" to "S-VIDEO". When using S-VIDEO IN connector on the rear panel, set "REAR AUX INPUT" to "S-VIDEO". When using VIDEO input connector on the front panel, set "FRONT AUX INPUT" to "VIDEO". When using VIDEO IN connector on the rear panel, set "REAR AUX INPUT" to "VIDEO". E Select edit mode Set the edit mode to "ON" for the VCRs if such a mode is equipped. ● On this VCR, set "PICTURE CONTROL" to "EDIT" (੬ pg. 20). F Start playback Press PLAY (4) on the playback VCR. G Start recording Press REC (7) on the recording VCR. NOTE: Be sure to select "AUTO" for "PICTURE CONTROL" (or "NORM" when "VIDEO CALIBRATION" is set to "OFF") after you finish dubbing the tapes. (੬ pg. 20) - 24 -