JVC VN-C205U Instructions - Page 16

Preparation (Step 1 Connection/Installation) 1-2 Mounting the Camera to the Ceiling Cautions Ceiling ● Attachment of a embedded cover in the ceiling (recess bracket) may be mandatory in certain regions. If this is so, ensure that the embedded cover (recess bracket) is securely attached before installing the camera. ● Please refer to the instruction manual for the cover in use for details on installation of the embedded cover (recess bracket). ● For more detail, please contact the JVC. Embedded Cover in Ceiling (recess bracket) 1. Preparations Open hole in ceiling, connect cables and mount camera to ceiling. 1. Input power cable 20 mm (3/4 inches) LAN cable Video signal cable 2. Approx.100 mm (3-7/8 inches) Alarm signal cable Safety cable 3. 1. Open a hole in the ceiling. Use the template and open a hole in the ceiling for the cables. Note There is no need to open a hole in the ceiling when using the cable extraction hole on the side of the camera. (☞ Refer to step 4. on page 17) 2. Pull out the cables from the ceiling. Before connecting, pull out the input power cable and video signal cables about 100mm (3-7/8 inches) from the ceiling. 3. Attach the safety cable to the camera. (Safety cable is not included) Attach the safety cable to the back of the camera. Cautions ● To avoid unforeseen accidents, attach the safety cable. ● Select a suitable safety cable based on length, strength, location, material (insulation property), etc. ● Always use the M2.6 x 6 screws mounted on the unit. 16