JVC VN-H137UA Instruction Manual - Page 20
Camera continued, Brightness, Set values, Color Level, Normal, Black Level, Gamma, Enhance Level
View all JVC VN-H137UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Internet Explorer Setting Settings (continued) Camera Page (continued) C Brightness Adjusts the brightness of an image. Increasing the value brightens dark areas, and decreasing the value makes bright areas more pleasing to the eye. [Set values: 128 to 0 to 127] D Color Level Adjusts the color level. A larger value increases the depth of color level, but a smaller value decreases the depth of color level. [Set values: 5 to Normal to 5] E Black Level Adjusts the black level. Setting the value to "Low" darkens the video image. [Set values: Low, Normal] Memo: ● If the black level is set to "Low", this may be too low depending on the monitoring device, or dark area will become complete black. ● When using the Monitor Output or H.264/MPEG-4 images, set it to "Normal". F Gamma G Enhance Level H 3D DNR To alter the appearance of dark areas in a video image, adjust the gamma curve. ON : Perform gamma correction. OFF : Do not perform gamma correction. The entire image appears dull. [Set values: ON, OFF] Sets the intensity of edge enhancement. A larger value increases the intensity of edge enhancement, but a smaller value decreases the intensity of edge enhancement. [Set values: 5 to Normal to 8] The noise on the screen will be reduced. [Set values: OFF, Low, Mid, High] Memo: ● With a moving object, the higher the noise reduction (as you select Low Mid - High), the more likely there will be an afterimage. ● When Framerate is 25 fps or higher, 3D DNR is deactivated. In addition, the settings do not reflect the 3D DNR operations. * The [Set values] in bold letters are factory defaults. 20