JVC VN-H137UA Instruction Manual - Page 87
LED State Status LED, LED State, Set values: Enable, Identify Unit
View all JVC VN-H137UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
LED State Page This page sets the [STATUS] LED indication of the camera. This page can be used during access using "admin" or "operator". A B Click [Advanced Settings] and [LED State]. Memo: ● Press the [OK] button to enable the new settings. If you press the [Cancel] button, your changes are canceled and the current camera settings are displayed. Status LED A LED State B Identify Unit Allow to check and set the [STATUS] LED indication of the camera. Turns the [STATUS] indicator On or Off when the camera is operating. Enable : Continues to light when the camera is operating. Disable : Turns the indicator Off after the camera has started. [Set values: Enable, Disable] If you wish to blink the [STATUS] indicator of the camera, set this option to "Blink". This may occur if you wish to visually check the camera operation when configuring the camera from the computer. [Set values: Enable, Blink] Memo: ● If you have set the [LED State] to "Disable", the indicator does not light even when you set the [Identify Unit] to "Blink". * The [Set values] in bold letters are factory defaults. 87