JVC VN-H137UA Instruction Manual - Page 52
PTZ Auto Return, Set values: Disable, Return Time, Set values: 1, Preset Position, Speed
![]() |
View all JVC VN-H137UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Internet Explorer Setting Settings (continued) PTZ Page This page sets the movement speed for Auto Return and Preset Position. This page can be used during access using "admin" or "operator". ● First, set the frame size to 640 x 360 or 640 x 480 in the [Encoding] page. (A Page 27) Click [Advanced Settings] and [PTZ]. A B Memo: ● Press the [OK] button to enable the new settings. ● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the value before the change was made. If you press the [Cancel] button, other changed items will also be restored to the values before the change was made. Note: ● You can use the Digital PTZ for frame sizes 640 x 360 and 640 x 480 only. (A Page 17) A Auto Return Mode Return Time Test B Preset Position Speed Restores automatically to the state being specified under [Mode] if the manually operated camera is not operated for the time period specified by [Return Time]. Sets an action taken after Auto Return. Disable : Disables the auto return. Home : Returns to the home position. Auto Patrol : Restores the auto patrol action. [Set values: Disable, Home, Auto Patrol] Sets a time before restoring the action by Auto Return. [Set values: 1, 2, 3, 5, 10, 20, 30, 60] min Click [Execute] to test the Auto Return action. Specifies the speed to move to the preset position. Memo: ● The speed to move the preset position of Auto Patrol is not specified in this setting as the setting of the speed to move the [Auto Patrol] page is applied. Speed 52 [Set values: Moment, Low, Mid, High] * The [Set values] in bold letters are factory defaults.
![](/manual_guide/products/jvc-vnh157wpu-instruction-manual-a680eb6/52.png)