JVC VN-H137UA Instruction Manual - Page 77
PC Time to Camera, Set values: OFF
View all JVC VN-H137UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
A SNTP Sets the SNTP client function. OFF :Does not access to SNTP server. ON :Gets the time by periodical accessing to the specified SNTP server. [Set values: OFF, ON] Memo: ● The time is recorded in the JPEG header when distributed by the camera. The time recorded in the JPEG header may not continue immediately before and after the acquisition of time from SNTP server. B SNTP Server C Interval D Time Sets an IP address of SNTP server. [Factory default: 0.0.0.0] Sets a unit and values of measurement for the time interval at which to access the SNTP server. [Set values: Min (1 - 60), Hour (1 - 24), Day (1 - 31)] [Factory default: 1] Displays the clock time of camera. You can correct the time by entering a value (without seconds). Memo: ● The time is recorded in the JPEG header when distributed by the camera. Discontinuity may occur in the JPEG header's time immediately before and after changing the time. E Time Zone Sets a time zone. [Set value: (GMT-12:00) to (GMT)UTC to (GMT+12:45)] Note: ● After changing the [Time Zone] setting from the factory default, the settings will not return to their factory defaults even if the [Initialize] button is pressed on [Maintenance] page. F PC Time to Camera Click [Set] to set the computer's time on the camera. * The [Set values] in bold letters are factory defaults. 77