JVC VN-H137UA Instruction Manual - Page 49
Recording Mode, Record Status
![]() |
View all JVC VN-H137UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
A Record Status Sets whether to use FTP recording or not. [Set values: ON, OFF] If A Record Status is set to "ON", FTP Record options will be displayed. B FTP Server C Path Sets an IP address of FTP server or FQDN. Sets a path name. If the [Path] is left blank, the FTP transfer is made to the home directory of FTP server. Memo: ● To make an FTP transfer to a directory locating under the home directory: Sets the directory name in the [Path] field. Separate directories by delimiter "/" from each other. Example: subdir1/subdir2 ● If "/" is set at the beginning of directory name, the destination directory of FTP transfer depends on the FTP server. D User Name E Password F Recording Mode G Constant Encoder Enters a user name. Enters a password. When a user name is specified, "******" will be displayed. Sets an FTP recording mode. Depending on the selected FTP record mode, G options vary. Constant : Transfers JPEG images to the FTP server at each specified time. Alarm : Transfers JPEG images around the time when the specified conditions are met to the FTP server. Constant+Alarm : Enables both Constant and Alarm. [Set values: Constant, Alarm, Constant+Alarm] Sets the continuous recording. Selects an Encoder for continuous recording. Memo: ● You can select an Encoder No. for JPEG file encoding. Interval Sets a recording interval by seconds. [Set values: 1 to 65535] sec * The [Set values] in bold letters are factory defaults. 49
![](/manual_guide/products/jvc-vnh157wpu-instruction-manual-a680eb6/49.png)