JVC VN-H137UA Instruction Manual - Page 85
Firmware, Update, Version, Program ID, Internet Explorer.
View all JVC VN-H137UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
C Firmware Update Version Program ID Displays the update, the version and the program number of the firmware. Updates the camera firmware and restarts the camera. Your camera settings are saved. Copy the new firmware file to the computer where you use the Internet Explorer, and open the file by pressing the [Browse...] button. Press the [Update] button to start firmware updating. Current services such as JPEG/H.264/MPEG-4 streaming are all stopped. The firmware updating may take several minutes. When the firmware is successfully updated, the message is displayed in Internet Explorer. Note: ● Do not shut down the system and computer power supplies when the firmware is being updated and when the camera is restarting immediately after firmware updating. If the power is shut down, it may cause a malfunction of camera. ● Before starting firmware updating, terminate any access to the camera (by the viewer or others), except for the access from the [Maintenance] Page. If an access to the camera from anything other than the [Maintenance] Page is valid, and if you start to update the firmware, the access from this [Maintenance] Page may be disconnected. If it occurs, terminate the access from anything other than the [Maintenance] Page. Then, access to this [Maintenance] Page again and restart firmware updating. Displays the version of the firmware. Displays the program ID of the firmware. 85