JVC VN-H137UA Instruction Manual - Page 27
Encoding H.264 High indicates High Profile, and H.264 Baseline indicates Baseline Profile.
View all JVC VN-H137UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Encoding Page This page sets JPEG/H.264/MPEG-4 encoding parameters. This entry links to the [Encode] item of [Basic Setting2] page. (A Page 17) This page can be used during access using "admin" or "operator". Click [Advanced Settings] and [Encoding]. A B C D Memo: ● Press the [OK] button to enable the new settings. ● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the value before the change was made. If you press the [Cancel] button, other changed items will also be restored to the values before the change was made. ● If encoding settings are changed during multicast distribution, the multicast will be reopened with the new settings. Please note that if the settings surpass the distribution limits, the multicast distribution will automatically stop. (A Page 72) ● There is upper limit to transmission bit rate from the camera. If a bit rate that exceeds upper limit is specified, this new setting will not be applied. For details on the maximum transmission limit, refer to the section on "Network". (A Page 4) ● H.264 High indicates High Profile, and H.264 Baseline indicates Baseline Profile. ● The contents displayed in C change depending on the encoder type and items selected in A. ● If the distribution bit rate exceeds 24 Mbps, the specified frame rate distribution fails. ● If the aspect ratio is changed while motion detection is set to ON, after clearing the motion detection area on the [Motion Detection] page, set the motion detection area again. (A Page 57) 27