JVC VN-H137UA Instruction Manual - Page 74
Access Restrictions Client Address, Access, Restriction, Set values: Deny, IP Address
View all JVC VN-H137UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Internet Explorer Setting Settings (continued) Access Restrictions Page This page sets the client restrictions. This page can be used during access using "admin". A B Click [Advanced Settings] and [Access Restrictions]. Memo: ● Press the [OK] button to enable the new settings. ● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the value before the change was made. If you press the [Cancel] button, other changed items will also be restored to the values before the change was made. ● This function applies to H.264,JPEG, MPEG-4 or Audio (Audio is for VN-H57U/H257U/H257VPU/ H157WPU only). This function does not restrict the access via the Web browser and the use of API. Note: ● The Access Restriction function determines the restrictions when TCP connection is made by the client. If the TCP connection is already established to the client, this TCP connection is not released even when you sets the access restrictions after the connection. Client Address A Access Restriction B IP Address You can restrict a client to allow access to the camera using its IP address. If "Deny" is selected, retrieving H.264, JPEG, MPEG-4 or Audio by the IP address set in [IP Address] option will be denied. An access to the Settings page is not restricted. If "Allow" is selected, retrieving H.264, JPEG, MPEG-4 or Audio by the IP address set in [IP Address] option will be permitted. An access to the Settings page is not restricted. [Set values: Deny, Allow] Up to 10 blocked or permitted client IP addresses can be registered. * The [Set values] in bold letters are factory defaults. 74