JVC VN-H137UA Instruction Manual - Page 50
FTP Recording continued, For the VN-H57U/H257U/H257VPU/H157WPU
![]() |
View all JVC VN-H137UA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Internet Explorer Setting Settings (continued) FTP Recording Page (continued) G Constant (continued) Sets the continuous recording. File Naming You can select any of three (3) formats of recording file names. If you select "Auto", a file name is created based on the year, month, day, hours, minutes, seconds, and a number. Example: 20111114161032-001-2.jpg If you select "Manual1", a file name is created based on the UserDefined-String which is added by year, month, day, hours, minutes and seconds. Example: Camera1_20111114161032001.jpg If you select "Manual2", a file name is created based on the UserDefined-String only. Example: Camera1.jpg [Set values: Auto, Manual1, Manual2] Sunday to Saturday H Alarm Sets the start and end time of recording for each day of week. [Set values: Unmask All, Mask All, Unmask Span, Mask Span] If you have selected "Specify the time period for invoking the action" or "Specify to stop the action", you must set the time period. [Set values: 00H00M-24H00M] Sets alarm recording. Encoder Sets an encoder for alarm recording and a JPEG frame rate. [Set values: 30 fps, 15 fps, 10 fps, 5 fps, 3 fps, 2 fps, 1 fps] Memo: ● You can select an Encoder No. for JPEG. ● The frame rates that can be set vary depending on the encoding settings. Trigger1, Interval, Trigger2 For the VN-H137U/H237U Trigger 1 : Sets a condition to record an alarm. [Set values: Position, Motion Detection, Tampering Detection, time] Interval: Unavailable. Trigger 2 : Unavailable. For the VN-H37U/H237VPU Trigger 1 : Sets a condition to record an alarm. [Set values:Position, Motion Detection, Tampering Detection, Day/Night, time] Interval: Unavailable. Trigger 2 : Unavailable. For the VN-H57U/H257U/H257VPU/H157WPU Trigger 1 : Sets a condition to record an alarm. [Set values: Pin Input1 Make, Pin Input1 Break, Pin Input2 Make, Pin Input2 Break, Position, Audio Detection1, Audio Detection2, Motion Detection, Tampering Detection, Day/Night, Time] Interval: [Set values: 1 to 3600] Trigger 2 : [Set values: Disable, Pin Input 1 Make, Pin Input 1 Break, +Pin Input 2 Make, Pin Input 2 Break] * The [Set values] in bold letters are factory defaults. 50
![](/manual_guide/products/jvc-vnh157wpu-instruction-manual-a680eb6/50.png)