Kenwood DDX7019BT Instruction Manual - Page 18

USB DMX7019BT/DMX7019BTM/DMX719WBT/ DMX719WBTM The unit is equipped with two USB input terminals. You can connect two USB devices. USB device (commercially available) (USB2) 5 V 1.5 A: You can also connect to the USB2 input terminal. (USB1) 5 V 1.5 A Rear panel Switching the USB devices (Only for DMX7019BT/DMX7019BTM/ DMX719WBT/DMX719WBTM) You can switch between the USB devices connected to the USB input terminals from the rear panel. On the source control screen, touch as follows: Selecting a folder/track on the list 1 Display the folder/track list. On the source control screen, touch as follows: 2 Select the list type. The playback control screen of the next drive appears and playback starts if there are playable files on the USB device. Performing the above operations will also change the drive of the following devices: • Selected internal or external memory of a smartphone (Mass Storage Class). • Selected drive of a multiple drive device. Playback operations 3 Select the desired track. • Repeat the procedure until you select the desired track. • For details about the list operation, see page 11. From : 1 Select the file type ([ ]: audio/[ ]: video). 2 Select a category, then the item in the selected category. Playback information and key operation • For playback information, see "Source control screen" on page 9. • For key operations on the touch panel, see "Common operation keys on source control screen" on page 10. • All tracks in the USB device will be played repeatedly until you change the drive, change the source or disconnect the USB device. 16 ENGLISH