Kenwood DDX7019BT Instruction Manual - Page 44
<Front Camera Mirror Image>
View all Kenwood DDX7019BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Settings Camera settings Display the screen. On the Home screen, touch as follows: Then, on the screen, touch [Camera]. • ON (Initial): Displays the picture from the rear view camera when you shift the gear to the reverse (R) position. • OFF: Select this when no camera is connected. • ON (Initial): Displays the parking guidelines. • OFF: Hides the parking guidelines. * Adjust the parking guidelines according to the size of the car, parking space and so on. When adjusting the parking guidelines, make sure to use the parking brake to prevent the car from moving. Touch one of the marks (1), then adjust the position of the selected mark (2). * Set the duraton (in seconds) to display the picture from the front view camera when you shift the gear from reverse (R) position to any other positions. • OFF/5 sec/10 sec/15 sec (Initial)/20 sec After the selected time, the screen returns to the previous screen. * Selectable only when and are set to [ON]. Initialise Make sure that A and B are horizontally parallel, and that C and D are the same length. • Touch [Initialise] to set all the marks to the initial default position. A confirmation message appears. Touch [Yes]. * Selectable only when is set to [ON]. (Page 42) * • ON: Displays the picture from the front view camera horizontally reversed. • OFF (Initial): Displays the picture from the front view camera as it is. * Selectable only when is set to [ON]. • ON: Activates the front view camera. Select this to use the front view camera. • OFF (Initial): Select this when no camera is connected. 42 ENGLISH