Kenwood DDX7019BT Instruction Manual - Page 54
For DMX7019BT/DMX7019BTM/DMX719WBT Indonesian models
View all Kenwood DDX7019BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Installation and Connection For DMX7019BT/DMX7019BTM/DMX719WBT (Indonesian models) Gray/Red ST REMOTE GND π Bright green/Red STEERING REMOTE Purple/Red Input 1 Input 2 Connect to your vehicle's steering remote harness. Contact your KENWOOD dealer for details. Connect the antenna cord to the antenna terminal. Purple with white stripe REVERSE To the car's reverse lamp harness when using the optional rear view camera 10 A fuse Light green PRK SW USB2 input terminal (1 m) (USB2) 5 V 1.5 A USB1 input terminal (1 m) (USB1) 5 V 1.5 A Extension parking cable ( ø ) To the car's parking brake detection switch harness (For best safety, be sure to connect the parking sensor.) White ] / White with black stripe [ Gray ] / Gray with black stripe [ Green ] / Green with black stripe [ Purple ] / Purple with black stripe [ Brown Orange with white stripe Light blue with yellow stripe MUTE ILLUMI STEERING WHEEL REMOTE INPUT REMOTE CONT To front speakers /mid range speakers* (left) To front speakers /mid range speakers* (right) To rear speakers /tweeter speakers* (left) * For 3-way speaker system connection, see also page 55. To rear speakers /tweeter speakers* (right) Not used. To the car light control switch To the OE remote adapter (not supplied) which is compatible with your car Blue with white stripe (12 V 350 mA) Red (Ignition wire) ANT.CONT P.CONT To the power control terminal when using the optional power amplifier (Or) To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna Yellow (Battery wire) Ignition key switch Car fuse Black (Ground wire) To the car chassis Car battery 52 ENGLISH