Kenwood DDX7019BT Instruction Manual - Page 42
User interface settings, <Steering Remote Controller>, <Viewing Angle>, Storing your
View all Kenwood DDX7019BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Settings To change the background color: Touch [Background Colour], then select the color on the screen. • You can select same color selected in as the background color by touching [Sync Colour Settings]. • If [Scan] is selected in , user cannot select [Sync Colour Settings]. *1 Selects background color in advance. *2 Selects a loaded favorite image in advance. Storing your favorite image for the background You can use your favorite image stored on the connected USB device for the background. • Connect the USB device on which the image is stored beforehand. • Use a JPEG/PNG/BMP file with a resolution of 800 x 480 pixels. 1 Touch [User1 Select] or [User2 Select] to store the image for the screen. 2 Select the folder, then the file for the background image in the selected folder. User Background Select 3 Rotate the image (1) if necessary, then confirm the selection (2). A confirmation message appears. Touch [Enter] to store the new image. (The existing image is replaced with the new one.) Select the viewing angle in relation to the monitor to make the image on the screen easier to see. • 0 (Initial)/-1/-2/-3 User interface settings Display the screen. On the Home screen, touch as follows: Then, on the screen, touch [User Interface]. Assign functions to the keys on the remote controller of the steering wheel. • This function is available only when your car is equipped with the electrical steering remote controller. • You can only register/change the functions while you are parked. • If your steering remote controller is not compatible, learning may not be completed and an error message may appear. 1 Press and hold a steering remote controller button for about 2 seconds to register/change when the unit is ready for learning. 40 ENGLISH