Kenwood DDX7019BT Instruction Manual - Page 55
For DDX719WBT except for Indonesian models/DDX719WBTM
View all Kenwood DDX7019BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Installation and Connection For DDX719WBT (except for Indonesian models)/DDX719WBTM 10 A fuse STEERING WHEEL REMOTE INPUT % % % Connector D: To the car's steering remote harness • Depending on the type of vehicle, it cannot be connected. Connect the antenna cord from the power cord (A) to the antenna terminal. (USB1) 5 V 1.5 A USB1 input terminal (1 m) * For 3-way speaker system connection, see also page 55. ¥ Purple with white stripe REVERSE To the car's reverse lamp harness when using the optional rear view camera Light green To the car's parking brake detection switch harness PRK SW Extension parking cable ( ø ) (For best safety, be sure to connect the parking sensor.) Blue with white stripe (12 V 200 mA) To the control terminal of the motor antenna or to the power Pin Color and Function P.CONT terminal for the booster amplifier of film-type antenna A1 Orange/White: Dimmer Brown MUTE Not used. A2 Yellow: Battery A3/A5 Blue: Antenna control (12 V 300 mA) A A4 Red: Ignition (ACC) A6 Black: Ground connection Connector B: To the car's harness A7/A8 White with black stripe [ / White ]: Left speakers /mid range speakers* (front) A9/A10 Gray with black stripe [ / Gray ]: Right speakers /mid range speakers* (front) B B1/B2 B5/B6 Green with black stripe [ / Green ]: Left speakers /tweeter speakers* (rear) Purple with black stripe [ / Purple ]: Right speakers /tweeter speakers* (rear) Connector A: To the car's harness D21 White: Input 1 D D22 Red: Input 2 D23 Black: Ground ENGLISH 53