Kenwood DDX7019BT Instruction Manual - Page 27

Other External Components View camera Install the view camera (separately purchased) in the appropriate position according to the instructions supplied with the view camera. You can use both rear view camera and front view camera. Connecting a view camera See page 55 for more information on connection terminals. • To use the rear view camera, a reverse lead (REVERSE) connection is required. (Pages 51 - 54) To display rear view camera screen manually You can display the picture from the rear view camera manually without shifting the gear to the reverse (R) position. Make sure is set to [OFF]. (Page 42) On the monitor panel: DDX7019BT DDX7019BTM DMX7019BT DMX7019BTM DDX719WBT DDX719WBTM DMX719WBT DMX719WBTM Using the view camera • For view camera settings, see "Camera settings" on page 42. On the pop-up short-cut menu (only for DDX7019BT/DDX7019BTM): Operations while the view camera screen is displayed To switch the screen between front view camera and rear view camera • Make sure is set to [ON]. (Page 42) Touch the area shown below. To exit the view camera screen Press HOME on the monitor panel or touch the area shown below. To display the rear view camera screen The rear view camera screen is displayed by shifting the gear to the reverse (R) position when [R-CAM Interruption] is set to [ON] on the screen. (Page 42) • A caution message appears on the screen. To remove the caution message, touch the screen. ENGLISH 25